Here's the recent articles submitted by oleg tchetchel
Articles By oleg tchetchel
Building Ventilation And Cooling
By: oleg tchetchel
Commonly available practical methods of plants cooling are:
* Exhaust fans or Power Roof Ventilators (PRVs).
To do a satisfactory job of eliminating excessively hot air, it is usually essential to have powered wall and/or roof exhausters. These fans should also help to control air pressure within the building whether it be negative or positive pressure.
* Supply Fans or PRVs.
A large number of buildings use exhaust PRVs to exhaust fumes, smoke, dust or other contaminants unavoidable in the operation of the business. As a result, these buildings are frequently under a severe negative pressure. The solution to the problem of this kind is usually found in the use of supply fans or "make-up" air ventilators.
* Air Circulators.
If the exhaust and supply air requirements of a building have been carefully engineered and installed, and there continues to be a high instance of worker discomfort, the problem usually relates to the matter of air circulation. In this way, in addition to amximum benefit from the fresh, cooler air, occupants receive the added comfort of air circulation over their bodies and they are not adversely affected by the superheated air being exhausted from the building.(read
entire article)
View : 217 Times
Category : General
Vaneaxial Fans
By: oleg tchetchel
High pressure small vaneaxial fan, developed by Buffalo Fan Company, finally resolves the problem of boosting air flow in long ventilation ducts of today's large residential houses.(read
entire article)
View : 175 Times
Category : Business
Air Moving Fans For Sulfur Recovery
By: oleg tchetchel
Buffalo Fan has a lot of experince with gas-tight and zero-leakage construction on fans and blowers, including: multistage lip shaft seals; Buna-N, Viton and Teflon seals; mechanical shaft seals; special fan housing gasketings; single and double carbon ring seals; hermetically sealed blowers; magnetofluidic and ferrofluidic seals; and packed stuffing boxes with barrier liquids and purgeable seals.(read
entire article)
View : 225 Times
Category : Business
Explosion Proof Ventilators
By: oleg tchetchel
Hazardous location air exhaust / ventilation fan (sometimes called explosion proof) may be required in any area where the presence of flammable gases, vapors or finely pulverized dust in the atmosphere is sufficient to create a threat of an explosion or fire. It may also be required where easily ignitable fibers or flying's are present. The following information is a representative, but is not an all-inclusive, list of the types of locations and operations that require hazardous location air exhaust / ventilation equipment in at least certain areas. Consult the current National Electric Code® for complete and current information.(read
entire article)
View : 288 Times
Category : Others
Side Channel Regenerative Blowers
By: oleg tchetchel
Side channel blowers are oilless and have no complicated intake/exhaust valving. Most can be mounted in any plane and, with dynamically balanced impellers, generate little vibration. Because they are nonpositive displacement compressor/vacuum pumps, they discharge air that is clean and pulsation free, which are important considerations for today's plant instruments and controls.(read
entire article)
View : 222 Times
Category : Hardware/Software
High Pressure Blowers Systems By Buffalo Fan Co
By: oleg tchetchel
Buffalo Fan Co. has introduced lately blowers-in-series high pressure systems to achieve static pressure, previously unachievable by single stage centrifugal blowers.(read
entire article)
View : 197 Times
Category : Education
Oleg Tchetchel
By: oleg tchetchel
The fan efficiency is directly contingent upon selection of fan and the operating point relevant to the system resistance.(read
entire article)
View : 229 Times
Category : Technology, Gadget and Science
Roof Fan Ventilators
By: oleg tchetchel
Simple roof ventilator is essentially an opening in the roof with a cover to keep out rain and to prevent winds from interfering with its functioning. Natural convection is an appreciable aid to ventilation in a large building only if it contains sources of large amounts of heat. A further useful adjunct is a fan fan, device for agitating air or gases or moving them from one location to another. Mechanical fans with revolving blades are used for ventilation, in manufacturing, in winnowing grain, to remove dust, cuttings, or other waste, or to provide draft for a fire. The addition of distribution ducts to the fan and a system for forcing air into the building provides greater efficiency. Outlets are designed to attain maximum mixing of air and to move large amounts of air at low velocity so that temperature layers are eliminated. Factories have special suction hoods and enclosures to draw away localized dust, fumes, and heat. Incoming air may be cleaned of dust by filters or electrostatic precipitators.(read
entire article)
View : 218 Times
Category : Health
Roof Fans For Two-way Building Ventilating
By: oleg tchetchel
Buffalo Fan Co. now offers a truly reversible (exhaust and supply roof ventilator for general building ventilation.(read
entire article)
View : 210 Times
Category : General
Aluminum Regenerative Blowers
By: oleg tchetchel
There are four power source choices for regenerative blowers: DC power, AC single-phase, AC three-phase, and engine. Features for regenerative blowers include: control panels and pressure or vacuum gauges. Most control panels include adjustment controls instead of a simple, regulator knob. Regenerative blowers can also have a pressure or vacuum gauge or sensor with a dial or digital readout that monitors the pressure or vacuum levels in the system.(read
entire article)
View : 222 Times
Category : Technology, Gadget and Science
