What Are The Obvious Features Of Micro Powder Mill

By Author: zhaojing
Total Articles: 263
Comment this article

Micro powder grinding mill has high efficiency and low cost. Its capacity is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same. The life span of tear & wear parts is more than that of straight impact crusher and turbine mill under the circumstance of same materials and fineness of the final powder. Usually, its life span is more than one year. There is no rolling bearing and screw in the grinding cavity, so as to avoid the damage to the machine caused by tear & wear of bearing and seals and the looseness of screws. The fineness of powder can reach ≦5μm with d97 once.Compared with jet mill, It is economic-cost, high-capacity, and the spare parts just need to exchange once a year; The bag filter is added to protect the environment.It is widely used in making fine powder or micro powder, and the raw materials should be non-inflammable and non-explosive under the Moh’s hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, ...
... talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc.1.Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). And a few of material powder can reach 0.013mm (1000 mesh).2.Compared with the common Raymond grinding mill under the same power conditions, the capacity can be increased by 10%; moreover, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 800-1200kgf..3.Its dust-removing effect fully meets the national dust discharge standard.4.The dust-removing effect can fully conform to the national standard.powder making machine: http://www.fote-machine.com/product3.html