Pointers To Handling And Replacing A Projector Bulb

By Author: Jo Alelsto
Total Articles: 405
Comment this article

Your projector is made of discrete parts and each of these parts is integral to your equipment. However, there are parts that may need more attention than others. The projector bulbs are perhaps the parts of the equipment that should receive more attention. In fact, the bulbs of the projector are the ones usually replaced. Replacing the lamp or bulb of your projector is not difficult. The only thing you would have to do is take away the top cover of the equipment and take out the busted bulb and replace it with a new one. If you are particularly adept with electric bulbs or with projector equipment then there should be no hassle about it. Anyway, you can always check with the user's manual if you are a little troubled or you can see the dealer. Never attempt to tinker your equipment unless you know what you are doing. One of the chief concerns of projector owners is the choice of the right bulb. Usually they come across a number of items in the market and get home or get back to their equipment with a wrong bulb. Choosing the proper bulb for your projector can increase the efficiency of your device. Poor projector ...
... performance may be due to wrong bulb selected and this can be troublesome. In addition, the choice of an incompatible bulb shortens the life of the bulb itself. This means if you spend a little more time to have your equipment go with the right, compatible bulb then you are saving your projector and its performance, the bulb life, and your cash as well.

When you buy a projector, check the user's manual. Check out what bulbs it requires meaning the ones it is compatible with. This will be your basis when the old one gets busted and you need to replace it. The manual will give you a list of items which you can opt for. Usually for new owners, they are advised to purchase an extra bulb to spare you from emergencies in case you have a presentation a few minutes later and discovered that the bulb has gone too dim or all busted. You may need to write down the list of compatible bulbs so you will spend less time discussing with the dealer about compatibilities. You may need to familiarize the model of your projector or its brand name. The dealers know the right kind of bulb to offer you. It is best, nevertheless, if you have a list of compatible bulbs to save time.

It is wise to remember that your responsibility does not end in having bought the right bulb. Taking care of the bulb is just as important as choosing the right one, if not more important. The life of the bulb no matter what kind it is and how expensive it is depends on how you use it and how you take care of it. Therefore, proper usage and appropriate care must be done in order to prolong the life of your projector lamp. If you lengthen its life you save more cash. Almost all bulbs in the market cannot be run for long periods of time, let alone keep them burning for a continued period of 24 hours or so. These electric lamps burn heat so fast and they generate much heat. It is the heat that shortens the life of these devices. Ask dealers about the maximum duration that the projector bulb can be left alight. If unsure, then simply allow the equipment operating for about three to four hours each time. In addition, operating in a well ventilated room will ensure heat becomes distributed. A hot operating environment shortens the life of your bulb.
Jo is a content writer for 'Litelec' (http://www.litelec.co.uk), a UK firm that specializes in the supply of electric light bulbs, light fittings, electrical accessories and related products for home and commercial purposes which they market at especially reasonable prices. If you have a high quality projector bulbs needs and if you have further cheap light bulbs requirement then take a look at Litelec.