How To Log Into Your Linksys Router

By Author: Alex Gold
Total Articles: 51
Comment this article

Linksys produces a sequence of network routers devices. Many hardware devices are delivered with Linux-supporting firmware which can execute third-party firmware very smoothly. The first ever design that was designed to support third-party firmware was the famous Linksys WRT54G router device.

The Linksys WRT160N/WRT310N sequence is the heir to the WRT54G sequence of routers from Linksys. The real distinction is the set up with 802.11n wireless NIC, offering a highest possible speed of 270 Mbit/s over the wireless system when work with other 802.11n routers devices.

The ultimate phase of establishing your Linksys wireless router would be to get into it. For this , do as instructed below.

For the first time, the Linksys router sign in login name should be remain empty, and then fiill the password as "admin". This Linksys router login password would be a standard one. You will then be at its page, where you will be able to set up the choices of the router to match up your need. Although, the router performs excellent without the need to do any set up as it is already working fine with its standard configurations, ...
... and you are ready to work with it. So far, if this wi-fi router is a non-wired device, you might have to further set an SSID so that the router will be recognized as yours own, and then you can use WEP so that you can manage who can use your wireless router by proper authentication.

To alter the DSL ISP, launch the browser with the writing “192.168.1.1” in the browser's URL address and you will directed to its installation page. At "Local IP Address", which is situated under the Setup a Basic Setup Page, modify it to 192.168.2.1. Then, click on the "Save Settings". You will then be able to alter your IP address to create it for yourself only.

To modify the IP address, get into MS-DOS. This can be done by simply clicking on the Windows "Start" button on the task bar, and then from its choices available, click on "All programs", then go to "Accessories", and then click on "Run command", or you can search for "cmd" and just click on it. From this phase, every modification will be going to happen using the keyboard, beginning with writing "ipconfig/release", and press the “Enter” key. You will notice that your IP address is created with 0's. Then, type "ipconfig/renew", and again click on “Enter”. You will then get your new IP address that includes a sequence of different figures.

Move back to the router's configuration page again by writing “192.168.2.1” on browser’s address. Now just check at "Status" that the IP address with has a series of digits, configurations, you have modified your IP cope with.

Acetecsupport in an independent technical support provider for Linksys Router Setup related problems including Wi-Fi setup, configuration, security, and upgrade etc. If you are looking for Linksys router Support, You can reach online technical support at their Toll Free No 1-800-296-4296 For US/CA.