Three Protective Devices On Circular Saw Blades

By Author: Jason Carter
Total Articles: 61
Comment this article

In the modern processing industry, circular saw blades are widely used for cutting because with the help of circular saw blade, working efficiency would be improved greatly. However, on the other hands, one factor which should not be neglected is that with wrong saw blades operation, it is more danger for worker’s personal safety. As for how to avoid saw blade using security incidents, firstly, it is important to follow right using steps and working procedure, and secondly, there should be useful protective device on saw blade which, just as its name implies, plays the role of protecting workers’ safety once some security incidents are happened.

OK, in the following article, I will mainly introduce a few protective devices on saw blade so that in most cases, it is safe to use saw blade for cutting.

Firstly, push rod or push pad
There are too many different types of push rod or push pad, and as for different cutting conditions, the types of push rod or push pad should be different, in most cases, push rod or push pad should be designed and manufactured exclusively and there is no uniform standard. Take ...
... the common using push pad for example, when using it for cutting the worker’s thumb can be protected by the hole at the right side and then horizontal batten at the bottom anvil plays the role of pushing cutting wooden raw materials forward.

Secondly, safety clamp
When blanking saw blade, you can use some limiting stopper, which is also known as the safety clamp so that people’s hands will not enter into the danger zone.

Thirdly, protective cover
When talking about saw blade protective cover, there are two main different types, one protective cover is used on the working table while the other protective cover is used at the bottom of working table.

As for the protective cover on working table, it is constituted with support, separation knife, brake block and protection cover that made from organic glass. During cutting process, the whole cover body would swing on the support so as to adapt the changes of wooden raw material thickness, meanwhile, inside the protection cover, there is reinforcing steel bar so that the whole shock strength of cover would be improved, and you don’t worry about the damage on the cover. With transparent polymethyl methacrylate cover, worker can clearly see the cutting condition and it would be high efficiency cutting.

Flostools is one of famous Circular Saw Blade wholesale manufacturers in China, and you can find different types and different sizes circular saw blades including Wood Saw Blades, Aluminum Saw Blades and other types.