Moldwel: Rapidly Growing Additive Of Choice For Injection Molders

By Author: joan evans
Total Articles: 16
Comment this article

MoldWel: rapidly growing additive of choice for injection molders

Injection molding of polypropylene is one the most common manufacturing techniques for making products having complex shapes and structures. However, the manufacturers often have to deal with problems like breakage or poor surface finish, whenever using recycled polymer or fillers.

Hard pressed by rising costs of virgin polymer, the manufacturers are caught in a cost v/s quality dilemma and have to juggle around with the percentages of recycled polymer and filler in their formulas.

Besides this, there are problems of poor dispersion of color masterbatches or poor flow rates which harass the manufacturers. These problems come from the variation of Melt Flow Indices (MFI) from virgin polymer to recycled one.

Vin Industries' MoldWel is an additive which is tailor-made for the situation. It is a high performance additive which not only removes moisture related surface defects but also improves the dispersion of polymers, homogenizing the mixture.

Further, it lowers the viscosity of the mixture and equalizes the MFI of various ...
... ingredients, resulting in better flow and productivity, besides ensuring proper dispersion of color in the end product.

High quality surface finish, optimum color dispersion and better physical properties in end products are some of the major advantages of the additive, which comes in opaque, light gray granules.

Already, the additive has found a loyal following among a number of injection molders and if the trends are anything to go by, the numbers are bound to increase with time.

For further information about Moldwel visit us on
http://www.moldwel.com/