How To Properly Install A New Motherboard

By Author: mikes wellington
Total Articles: 8
Comment this article

The motherboard is the most expensive computer component so be sure to treat and deal with large care.There some things you should do to ensure no motherboard damage occur as you prepare for installation.

Make sure you have a mind, clean well lit, and the employment rate place.Relax and make this task fun and educational.You will need a tool such as a phillips screwdriver, maybe some needle nose pliers and the manual that came with the board.

Most importantly you must remove any and all electrical static electricity from your body and electrical clothes.Static is a big problem and will quickly damage the chip on your new board.

PREPARING FOR INSTALLATION

Preparing to work on your system involves work area, lighting, and lots of great danger is the chance charge.But more.One static electricity will be no problem now properly remove static buildup.

Delete this danger with basing yourself.Touch metal case of the system unit or better yet, touch not door in your work area to remove any static electric charge.

Sit back and carefully read your user’s manual and familiarize yourself with ...
... the new motherboard and layout.Taking currently motherboard installation will improve performance like you ever thought.

Study your new motherboard and keep the box it came in.Remove of protective wrap very carefully and without damaging wrap.This done just in case you need to return the motherboard.

You may need to return the motherboard if you make a mistake in pit row purchase.Does your new motherboard with the holes in this case? If there is reason to re-board, you can only put back in the box for return.

Creating a pleasant installation of your new motherboard and prepare for http://www.torontopcs.com well.Go and click on the photo page to familiarize yourself with all the components in the procedure as cmputer.Follow guildline to install your new motherboard.

REMOVING OLD MOTHERBOARD

First Turn on your computer and access your CMOS setup. This is done as a computer that calculates memory.Press key combination to access your bios.once in the bios, select “Standard CMOS Setup” and write down all the information about your computer drives.

Make sure you get the density floppy drive and type of hard drive you have. Once you have this, turn off and unplug the computer and remove the case.

Both studies unit layout system and you may want to take notes as you remove components and connections so that it will be easier when it comes to re-install components or connections.

Go on pull the cable connected to your old motherboard.Remember to label any and all connections to make reinstall them easily later.Here s’ which is very important to take a few moments to learn your old and new board before deciding anything.

Third carefully remove all the drive and label the connectors if needed.Remove drive and get them out of the way in place.Place secure all the small screws in a cup or something where they will not get lost.

Carefully hold the motherboard and provide a gentle upward tug to make sure the connections, screws, or other device is not interferring with the removal of the board.

Once you are sure there is no obstacle for the board to be removed, lift the board out of unit.Look system to see if components such as memory must be installed to a new motherboard.

INSTALLING a new motherboard

Installing a new motherboard is the reverse order to remove the old motherboard.Be make sure you remove all electrical static electricity from your body and clothes.Inspect new board for damage and to ensure it is the right motherboard for your computer.

Carefully align the new motherboard with the case and secure the system unit board.Be careful not to secure the screws too much.Install CPU chip if it is not installed on the board from the manufacturer.

Connect the power connector of the power supply connector.Take care in not forcing the motherboard to bend the connector pins.

Install the RAM into their sockets and check to make sure they punched in completely.Re-connect all other devices such as controllers, expansion cards, and eventually drive.

Check the voice, and video card for proper installation. Did you install your internal modem, or an adapter card scanner? Connect the leads to the On-Off switch and indicator of your hard drive.

After all connections and components installed, quit and went back to check again, and then, check out some more.Replace cover system unit after you know all is well.

Your system should now be ready to go.The motherboard may come with a cdrom containing the device drivers and other software utilities that may be required to be installed.
Now try turning on the computer and if the POST is completed without a hitch, you there.If you have problems, go back and check all connections and devices.

Ita is easy to install or upgrade not only the motherboard, but nearly every other component in the understanding of a busy system unit.Get your computer now and save big repair costs on future PCs.

For more information: http://www.torontopcs.com/