Victorian Cast Iron Radiator Heating System Installation Tips

By Author: Edward Hall
Total Articles: 93
Comment this article

It is possible to fit your own Victorian cast iron radiator heating systems. This can be a tricky job but if you have good DIY skills and you get more advice it should be relatively straightforward. Here are just some useful ideas to help you install Victorian cast iron radiators in your home.

1. Set Your Budget

You do need to set yourself a realistic budget for your cast iron radiator installation. Antique Victorian cast iron radiators can be very pricey.

• Many people looking to carry out period renovations will be searching for original Victorian cast iron radiators in good working condition.

• This means the prices for these types of radiators in good condition can be high.

• For a more affordable option you could consider reproduction Victorian cast iron radiators.

• These are manufactured in authentic designs and can be purchased direct from the manufacturer and also from heating suppliers.

• Reproduction Victorian cast iron radiators can be a lot more affordable than antiques and you will also get a guarantee from the manufacturer.

2. Get as much expert ...
... advice as you need

Victorian cast iron radiators will need to be fitted carefully and correctly to ensure they provide the maximum benefits for your home. If you have never fitted this kind of heating system before then you need to get some expert advice before you get started.

Specialist heating suppliers and engineers will be able to provide some useful advice on key issues such as how many cast iron radiators to buy and what fittings you will need to install them to existing heating systems.

3. Calculate the amount and size of radiators your home needs

Before you go out and buy any Victorian cast iron radiators you need to work out your home heating requirements. This will enable you to draw up an accurate shopping list of what you need. For example you can use radiator calculators to work out what size and number of radiators you need for each room.

By working these factors out first you can make sure you buy the right amount and size of radiators for your home.

4. Plan the location of each radiator

If your home already has an existing heating system then you should have pipework in place ready to go for your new Victorian cast iron radiators. However if you don’t have heating then you will need to plan the location of each radiator in your room and ensure you can run pipework to the right places.

Ideally you should be looking to place Victorian cast iron radiators against windows or external walls. This will help offset any heat loss and maximise the effectiveness of the radiators in each room.

You can install your Victorian cast iron radiators yourself. Make sure you plan the installation carefully and ensure you get as much help as you need from the experts.