Using Versatile And Energy Efficient Led Light Warning Fixtures For Various Needs

By Author: Sunil Punjabi
Total Articles: 2565
Comment this article

With an LED light warning flashes can be very easily produced and with excellent special effects too. A lot of times, you would need emergency lighting, whether it is for a construction site, a road repair site, road clearance or for a patrol car on the highway. Light emitting diodes are ideal for warning and cautionary signals for many different reasons. You would want your warning lights to have a penetrative capability, which means it is visible from a long distance away. That proves to be extremely important when there have been road blockages due to accidents or landslides especially on highways. High intensity beams produced by LED modules with arrays of 1W – 10W LEDs could be highly useful as brilliant flash lights.

When you use LED light warning signals become more attention grabbing purely because of the amount of technology advancement in the past couple of years especially around LEDs. Flashing patterns are amongst the best things to happen to emergency vehicle lighting. Flash patterns in some cases are in-built and can be operated with an advanced menu control and push buttons. Simple circuitries ...
... can also be used with controller boxes that can help in varying flash patterns. The LED lights are manufactured to operate in steady unblinking mode, blackout mode for covert operations used by stealth vans and active flash modes where the blinking can be made to occur in excess of 20 – 30 times per minute.

The amount of special effects that are being introduced into LED light fixtures is making them even more effective. With LED light warning can be sent out by using color codes as well. LED light bars are seen flashing amber, red, green and blue colors. Ambulances use beacons mounted on their roofs which are gyrating, flashing beams all around. The use of colored filter optics has allowed more variations. It is now possible for the same mono-color LED to send out multi-colored intense beams as cautionary signals, especially when there are more vehicles tracking these signals. Even lenses and chrome deflectors are used along with the LED modules to ensure that intensity and the angle can be adjusted.

Modern LED circuitries have dimming options as well to ensure that the intensity can be lowered when not required. This allows more power consumption as well. Also, when you use LED light warning can be sent out in all directions if you wish to. Gyrating beacons are a good example of emergency lights offering 360 degree visibility. LED light bars with front and side LED modules offer excellent visibility too and the intensity helps visibility in hazy conditions too. There is beam adjustability as well, with 10 – 40 degree beam angles easily achieved. Thus, it is possible to easily control the beam coverage, whether it is narrow or wide. In some cases, you need to cover a wider area, while in some cases you might want to focus intensely at a particular angle. Thus there are plenty of options available with LED light circuits.

Extreme Tactical Dynamics is a one-stop shop for
Light warning and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available - http://www.extremetacticaldynamics.com/