How To Easily Throw A Cast Net

By Author: Rob Thomas
Total Articles: 4717
Comment this article

Persons use cast nets as an efficient way to catch sea creatures like shrimps and bait fish. As effortless as this task sounds, casting it calls for a bit of practice and skill in order to cast it out properly.

This writing will provide you guideline procedure to learn how to throw your cast net efficiently. There are a couple methods that can be implemented, but some methods are better than others based on how many persons are maneuvering it and the size of the net.

Required Tools:

Slider ring

Required Materials:

Cast net
Lead line

Instructions are as follows:

1. First you have to connect the lead line around your left wrist and make a loop in the last part of the line, and pass the line into the loop to create another loop. Place your left hand in the second loop and drag the line to clinch it around your wrist.
2. Place the net and line at your feet and loop the line to about 6 to 8 inches in diameter in your left hand until you remove all the slack from the line with your left hand sustain it to about chest level.
3. Grasp the slider ring on ...
... the lead line that is at the center of the net in your right hand and move it up going up to your left hand. The net will then lengthen as the slider ring is moved along the lead line. When you are able to lift the net from of the deck by the slider ring, the net should hang straight down with all the lead weights at the base skirt lynching at the same height in a clump, if the weights are not hanging evenly then you will have to untangle the filament on the interior of the net before continuing.
4. Place the slider ring into your left hand and hold the net approximately half of the way to the end with your right hand and move the gathered net within your right hand to your left without letting go of the loop or the slider ring. If your left hand feels uncomfortable and crowded then you may hold the net just below the slider ring instead of on the ring itself.
5. Grasp a section of the bottom skirt, in between the weights, and put this section into your teeth. Next hold the skirt at a point, counter-clockwise, arms-length from the section in our teeth. Turn to your left at the waist to wind up and cast the net by spinning to the right and letting go of all points at once and don't forget to let go with your teeth. Before throwing, twist your body away from the target, then spin your body easily as you cast the net and let it go so the cast net hits in a circular form. Once it hits the intended aim then pull the near to close the net.
7. If the net spreads out evenly and has a slight clockwise spin when it moves in the air then you will have an idea that you are doing it properly. Now give the net a couple moments to settle to the bottom and pull it in and as you proceed loop the lead line in your left hand.
8. As soon as the net gets to you, lift it onto the deck by the lead line and let it out it by moving the slider ring up the lead line. If you are left handed simply reverse the process.

Tips and Warnings

1. If you are going to make a loop that is any bigger than 6 to 8 inches in diameter then casting it will require using your two hands.
2. Prior to casting a net, always check to ensure that the loop is still safely around your wrist.
About Author:
Please visit this link for more information on How To Throw A Cast Net and this link for information on Fly Fishing Casting Techniques.