How To Create A Kite

By Author: Rob Thomas
Total Articles: 4762
Comment this article

Kite making has been a past times for many persons in many countries for many years. Apart from flying a kite building it is a great means of showing off your own creativeness for arts and crafts. For children who are looking for new leisurely activities to occupy their time in the holidays kite flying is ideal. Pre-cinstructed kites have recently become more popular and are even very inexpensive.

While a lot of persons decide to purchase ready made kites, construction effort that goes out into making a brand new kite on your own is so much more exciting. You can also make your kite in a wide range of shapes and sizes, and with a few materials with these instructions you can continue to create your own kite with these instructions.

Items needed:

Bamboo sticks
Chord
Strings
Plastic bags
Razor
Scissors
Ruler

The Instructions are as follows:

1. Take the knife to cut the bamboo into separate sticks. Make the longest which will work as the spine of the kite so it can be turned vertically while the smallest piece will be turned horizontal. Then take the chord ...
... and connect the two pieces as one at the midpoint where it outlines the frame of the kite however, ensure that the lengths that divide the horizontal bamboo stick is equal and use the ruler to calculate the measurements.
2. Use the knife to make a small indent at the last part of each bamboo stick, deep enough so that a group of strings can be put in them. Then cut a length of string and place it through each indent of the bamboo sticks at each section so that it goes around the kite. Then stretch the chord around the kite so that it makes a loop at the apex of the kite so it can be wrapped a couple times to stabilize the frame.
3. Cut the plastic bag into pieces with the razor, and make sure it is big enough to go over all the triangle(s) as well as its borders. Then take the glue and attach each section tightly to the edges to ensure that it folds over the string enclosure.
4. Take another group of strings and connect them at every end where they will be fastened together at the centre. This is the same spot where the fishing line will be attached to fly the kite.
5. Then join another length of string at the ending of the kite to make the tail of the kite.

Tips and Warning

1. Whenever you are pasting the plastic bag over kite, you can also use spray glue to connect them at the centre to strengthen the frame.
2.Whenever you fly the kite, try to avoid locations with electrical cables that will hinder you from flying it. Many kites end up being caught within the cables and cannot be regained.
3. You can use the same fundamental principles of kite construction with minimal adjustments to create your own kite frames and even shapes such as squares and octagons.
4. If you want to make the kite with more strength, create the frame with a bend.
About Author:
Please visit this link to know How To Make A Kite and read here for more information on How To Make A Kite.