What Are Some Common Issues With Sink Mixer Taps & Their Resolution?

By Author: Leading Catering
Total Articles: 10
Comment this article

Commercial sink mixer taps are essential in bustling kitchens. They mix hot and cold water for effortless temperature control and effective usage. However, like any other equipment, they can generate problems over time. If not resolved, these problems can restrict workflow and result in expensive repairs. This article will look at common issues with these products and discuss fixing them promptly.

Leaking Tap

Leaking is one of the most routine issues with these commercial offerings. A leaking tap wastes liquid, increases utility expenses, and can ruin kitchen floors or countertops.

Causes:

Worn-out washers or O-rings are often to blame.

Sometimes, the valve seat may be rusted or ruined, which can also result in leaks.

How to Fix:

The primary thing to do is switch off the water supply.

Take out the faucet handle and spout.

Change the washers or O-rings.

If the valve seat is rusted, resurface it using a seat grinder or change it if required.

Frequently checking and changing washers can help stop leaks in the long run.

Low Water Pressure ...
...

Another recurring problem is low fluid pressure. This issue can disturb the cleaning procedure, making it challenging to rinse utensils or fill large pans.

Causes:

A choked aerator can stop the flow of liquid.

Mineral remains or dust may accumulate in the pipes or the mixer faucet.

In some situations, the issue could be with the technical supply connection.

How to Fix:

Commence the process by inspecting the aerator of the sink mixer tap in kitchen. It is situated at the tip of the faucet. Open it and remove any dust or mineral accumulation.

If your issue is not resolved even after cleaning the aerator, look at the various supply connections and confirm whether the valves are fully open.

If the issue continues, you may be required to call a plumber to check the tubes for any stoppages or damage.

Frequent maintenance of the aerator can maintain adequate flid pressure.

Leaking When Turned Off

A tap that continues to drip even when switched off is frustrating and wastes the liquid. Over a period, this issue can hugely add to your water invoice.

Causes:

Damaged seals or gaskets.

The cartridge inside the faucet may also be damaged or suffering from wear & tear.

How to Fix:

Switch off the connection.

Remove the tap handle and access the cartridge or seals.

If the seals are damaged, replace them.

If the cartridge is worn out, it needs to be replaced. Make sure to use the correct cartridge for your tap model.

Replacing the seals and cartridges as part of regular maintenance can prevent this issue.

Noisy Tap

A noisy sink mixer tap in bathroom or kitchen can be disruptive in a commercial kitchen environment. If your mixer tap makes a whining or banging noise, it may indicate a deeper problem.

Causes:

A water hammer can create a banging noise resulting from a premature stop in water flow.

Loose washers or pipes can also cause a tap to make noise.

High water pressure may cause a whistling or whining sound.

How to Fix:

To resolve the water hammer issue, you can set up a hammer arrestor, which soaks the shock of the premature stop in the flow.

Check the washers and pipes to ensure they are secure. Tighten any loose parts.

If the high pressure is the issue, you may need to install a pressure-reducing valve to regulate the pressure.

Early checking and resolution of faucets making sounds can help detect more significant issues in the future.

Temperature Control Issues

Precise temperature maintenance is crucial in a commercial kitchen. If your sink mixer tap for sale doesn't produce the correct temperature, it can be annoying and even risky.

Causes:

A defective mixer cartridge can result in uneven fluid temperature.

Mineral accumulation in the tap can also impact temperature control.

Issues with the heater or connection lines could result in the problem.

How to Fix:

Look at the mixer cartridge first. If it is impaired or facing wear and tear, change it.

Wipe any mineral accumulation from the faucet's inner elements.

Check whether the supply in the kitchen is operating efficiently. If the heater is faulty, it may need servicing or replacement.

Regular maintenance of the mixer cartridge can prevent temperature control issues.

Stiff or Hard to Turn Handles

The handle of a sink mixer tap that becomes stiff or difficult to turn can slow down workflow in a busy kitchen and, if forced, lead to further damage.

Causes:

Mineral deposits or dirt inside the tap mechanism can cause stiffness.

The cartridge or valves inside the device may be damaged or worn out.

How to Fix:

Stop the supply.

Take out the handle and check for dirt or mineral accumulation. Clean the space properly.

Change the cartridge if it is worn out.

Use some lubricating agents on the moving parts for easier functioning.

Frequently rinsing and lubricating the tap system can keep the handles moving smoothly.

Water Doesn't Mix Properly

If your faucet fails to combine hot and cold water correctly, it can make activities like washing utensils or cooking food challenging.

Causes:

A defective blender valve may be stopping the liquid from blending.

Mineral buildup inside the spout could also stop the mixing procedure.

How to Fix:

First, check the mixer valve. Change it in case it's defective.

Wipe the inner part of the faucet to clear any bottlenecks or mineral accumulation.

Changing the mixer valve as part of continuous maintenance can stop this problem from happening. You can buy sink mixer taps online from a trusted supplier to stop this issue from occurring.

Tap Base Leaks

Liquid coming out from the faucet's base can ruin your kitchen and result in mould or mildew.

Causes:

A loose link between the tap and the tabletop or basin.

Damaged seals or washers near the base.

How to Fix:

Tighten the mounting nuts underneath the sink to secure the tap.

If the seals or washers are worn out, replace them.

Regularly checking the base of the tap can help identify leaks early.

Corrosion

Over time, metal taps can rust, mainly if your kitchen uses hard water. Rust can result in leaks and reduced water quality.

Causes:

Hard water can result in mineral accumulation, leading to rust.

Exposure to certain cleaning chemicals can also corrode metal taps.

How to Fix:

Regularly clean your tap with mild soap and water. Avoid harsh chemicals that can speed up corrosion.

If the rust is serious, you may need to change the involved components or the entire device.

Setting up a softener can help limit mineral accumulation and increase the life of your tap.

Taking steps to prevent corrosion can save you from expensive replacements. You can shop sink mixer taps online from a leading supplier to eliminate these problems.

Broken or Damaged Spout

A broken or damaged spout can cause water to spray uncontrollably, leading to water waste and making it difficult to complete kitchen tasks.

Causes:

Physical damage from heavy use or accidents.

Wear and tear over time.

How to Fix:

If the spout is cracked or damaged, it may need to be replaced.

Look at the connections and confirm that they are tight. Sometimes, loose connections can cause the spout to wobble or leak.

Regularly checking the spout can help identify issues before they worsen.

Conclusion

Commercial sink mixer taps are essential in a kitchen but are not immune to problems. Regular maintenance and prompt fixes can keep your tap functioning properly. From leaks and less water pressure to temperature maintenance and rust, swiftly resolving these problems can save you time and capital. Ensure checking the taps frequently and ask for professional assistance if required. A well taken care of tap will guarantee smooth running of your pantry for years to come.

For more information please visit here - https://leadingcatering.com.au/tapware/sink-mixer-taps.html