Wood Staining – The Dos And Don’ts

By Author: Sherina Jeff
Total Articles: 6
Comment this article

Wood staining is the artistic process that helps make your wood projects look more professional. But for perfect finishing, one must know the right way to do it. Here is a list of what you should and should not do when applying the wood staining Whistler.
The Dos of Wood Staining
[1] Do Choose the Right Stain
The choice of stain color is critical. Some of the different types that exist include:
Oil-based
Water-based
Gel stains
Oil based stains will seep into the wood grains and bring in a natural finish.
The water-based stains also do not take time to dry on the surfaces and are easy to wash off.
Gel stains are highly viscous and tend to give a uniform coloring. Select the stain that would best work for your project.
[2] Do Prepare the Wood Properly
With regards to a stain job, preparation is everything. Ensure that the wood surface is spotless and finished. You should sand the wood with fine-grit sandpaper, 220 grit is sufficient to remove any bumps on the wood. Clean the surface from any residues with a cloth to set ...
... it up for staining.
[3] Do Test the Stain First
Before doing wood staining in Whistler, testing it on a non-noticeable part of the wood is advisable. It helps you determine what the stain looks like and if you need to adjust anything.
[4] Do Apply Stain Evenly
It is also important to note that the stain must be applied using a quality brush or a lint-free cloth. Make sure to paint the stain toward the grain to achieve an even coat. Work in manageable sections to avoid uneven application.
The Don'ts of Wood Staining
[1] Don’t Skip the Prep Work
Failure to prepare the surface properly results in rotten wood staining in Whistler finish. Stain reacts badly with dirty or unsanded wood surfaces since it is bound to stick unevenly. This results in marks and streaks.
[2] Do not apply the stain in extreme conditions
Do not apply stains when the temperature or humidity is high. The conditions such as temperature and humidity affect the drying time and result in an uneven finish. They are best used in clean, controlled environments with good ventilation.
[3] Do Not Use a Low-Quality Brush
If a poor-quality brush is used, a brush effect and roller effect may appear on the wood. You must use a quality brush or cloth when applying the best results.
Conclusion
Wood staining is an interesting process that can transform a piece of wooden furniture and allow it to be protected better. If you adhere to these dos and don’ts you are on the right track to attaining that clean professional look. With these tips at your fingertips, your wood staining Whistler efforts will have a gorgeous finish that will stand the test of time.
This article's author is Sherina Jeff. For additional information regarding wood staining in Whistler please continue browsing our website at finefinishpaint.com.