Hacks That You Should Try When You Opt For Professional Concrete Slabs!

By Author: Ashton Coaldrake
Total Articles: 253
Comment this article

When it comes to professional concrete, you need to be aware of the tips and hacks that will make it easier to pour the concerete. The process of puring the concrete is not that complex but since many are not aware of the tips they end up making a mistake. Hence, it is essential that you get in touch with a reliable service provider and discuss all the essential factors. Let’s have a look at those:
 
Knowing How and When to Finish the Concrete:
A concrete finish plays an important role in keeping the concrete slab in good shape. It acts as a protective layer and prevents the surface from developing cracks easily. In short, it adds life to the longevity of the concrete slab. But the problem is most people are not sure when to add the finish once the concrete has been poured. As a result the finish is rendered ineffective.
 
To begin with, you have to wait for the concrete to dry up completely before you apply the finish. The water in the concrete needs to bleed out completely. This is a tricky step because if the water does not bleed out naturally, you cannot apply ...
... the finish. And there is no way you can fasted up the process. You have to give the due course of time for the concrerte slab to dry up.
 
Secondly, when you get started with the finishing process, you should better opt for the broom finish. For a concrete slab, the broom finish is the best. But most homeowner, opt for the machine-floating or troweling process. This is generally a bit powerful proces and often complicates the overall quality of the pavement.
 
Proper Joint Installation:
Make sure that high quality joints are installed along the surface of the concrete slab. This will allow the slab to expand and concrete depending on the chnaging weather. If you don’t install the joints, the edges of the concrete will suffer. It is important that you are aware where to add the joints. Some tend to add too few or too many of the joints and don’t have a clear idea about the depth of the cut. As a result the concrete slab suffers.
 
For the right cut and proper joint installation - follow this formula:
 
Cut all the slabs at a depth of one quarter of the existing thickness of the slab. Make sure that the spacing between the joints is adequate so that the slab can expand or concrete properly. For example: if the concrete slab is four inches thick, you need to make a cut which is one inch in depth. Now add the joints after the cut is made. The joints should be as straight as possible so that the slab can expand or concrete accordingly.
 
Note: the joint should be added after the drying process is complete. If you do it before then the process will become compliacted and cracks will appear in the concrete slab.
 
Do Not Use Salt Once the Slab Has Been Installed:
Most people make the common mistake of adding salt to the snow on the concrete slab. They do this because salt is a powerful anti-ice tool and helps to met the snow faster. But the problem with this step is that salt tends to have a negative impact on a newly poured professional concrete Whyalla. The best solution is to add sand to the snow so that it increases the traction rate and the snow melts faster. Some might suggest that you can use fertilizer instead of salt or sand, but don’t do that because the fertilizer is equally not safe. Using sand is the only way out.
 
Always Go for Air Drying Technique:
The professional concrete Whyalla will be a success only when you opt for the air drying technique. Let the concrete dry on its own. There is no need to add any sealant to the surface. Most people overlook this step. They want to seal the concrete immediately after the pouring is done and in this process they end up messing. Since the sealing of the concrete protects the concrete slab from various types of damages like thawing and freezing. But the trick lies in waiting. Once the slab has dried completely you can add the sealant but not before. Do not rush the process if you wish to get the desired results.
 
If you are not sure how much time the drying process will take, you can opt for one tip. Set up fans surrounding the concrete slab. Put the fans on full blast so that it fastens up the drying process. This step is really very effective and helps the slab dry out properly.
 
Hiring A Reliable Service Provider:
Finally, everything boils down to the experts. If the service providers are not reliable and have no idea about these factors then there is no point in hiring them. You need experts who are well aware of the problems and know what to do in order to deal with the problems. Find ou who are the leading service providers in the city. Get in touch with the best and get started with professional concrete Whyalla.
 
About the Author: This contribution has been made by Ashton Coaldrake who has written a number of articles on Professional Concrete Whyalla and provides fruitful information.