Balding Of Tyres: Reasons, Dangers And Necessary Steps

By Author: James
Total Articles: 4
Comment this article

You must be aware of the health condition of your car because this moving machine may develop several mechanical faults over time. Several components in your vehicle need your attention because of their functions.

In this blog, we will talk mainly about tyres because these vital parts of your car are important for both safety and comfort.

Tyres need routine servicing and maintenance. If you do not maintain your car tyres according to the recommendations of tyre experts, they will wear out quickly and you must buy a set of new Cheap Tyres Coventry.

Tyres may face a lot of issues during their lifespan, such as balding, cracks, bulges, and driving conditions. These issues decrease the strength and performance of your tyres.

Let us concentrate on balding because this is one of the most common issues in car tyres.

What are bald tyres?

Several types of tyres are available in the market with different tread patterns and tread depths to satisfy the specific needs of car owners. For example, winter tyres come with a tread pattern whereas summer tyres have a shallower tread pattern.

Tyres ...
... lose tread depth due to driving conditions. Moreover, driving habits and mistakes also play a vital role in degrading tyre rubber. Tyres are reliable with optimum tread depth on roads. Therefore, you should not drive with tyres after they have partly or completely lost the tread depth.

Before we discuss the risk factors of bald tyres, let us have a look at the prime reasons for tread wear in tyres.

Reasons for tread wear

Improper air pressure:

The right amount of air is essential in car tyres. Your user manual guides you to determine the correct level of air pressure. Check your user manual and maintain the correct air pressure in your tyres to avoid issues like uneven tread wear.

Tyres with low air pressure run on roads with an increased contact area. As a result, heat and friction take place to degrade tread rubber on both sides of the tyre.

High air pressure shrinks the contact are and more middle part of the tread touches the road surface. As a result, tread wear takes place in the middle area of the tyre tread.

Incorrect wheel balance and alignment:

Tyres should run on roads with perfect balance and alignment. Driving conditions affect these aspects of road safety if you do not visit a garage to check your tyres for a long time.

Wrong balancing and alignment lead to balding in car tyres. This issue is irreparable. Therefore, you must replace these tyres with a new set of tyres.

Poor maintenance:

Driving mistakes and bad driving habits promote tread wear in car tyres. Moreover, ignoring the maintenance of tyres is also a prime reason for the increased rate of tread wear. If you store your tyres for any reason, you must store them appropriately because of the risk of tread wear. For example, you must store your summer or winter tyres when they are not required. You can use these tyres safely in the next season if you maintain an appropriate environment in the storage area.

Speed, heat, and friction:

Your tyres run at high speed on roads and create heat and friction. Heat and friction are common factors to degrade tread rubber. As you may observe, increasing speed will increase the effects of heat and friction. The road surface is also a considerable factor in this condition. Increasing speed on a rough surface will increase the intensity of heat and friction.

As you see, multiple reasons are responsible for tread wear in tyres. You must change your tyres when you see initial signs of tread wear. Do not let your tyres become completely bald because this condition is extremely dangerous on noisy roads.

If you do not change your bald tyres, you should be ready to face the following risk factors:

Risk of blowouts and punctures:

Since your bald tyres run on roads with a thinner wall of rubber, a sharp object may easily damage their tread part. Moreover, these tyres are more prone to face a blowout due to heat and friction.

Poor grip and traction:

Proper tread pattern with appropriate tread depth is essential to maintain proper grip on both wet and dry roads. Obviously

Risk of hydroplaning:

Bald tyres do not have proper tread depth. Therefore, they do not displace rainwater efficiently. As a result, the risk of hydroplaning increases because of insufficient tread depth.

Inefficiency in snowy road conditions:

Mounds of slush are dangerous for bald tyres. Low tread depth makes the tyres unable to displace snow and slush. As a result, bald tyres may slip on snowy roads at any time.

Negative effects of heat:

Proper tread depth saves the tyre from heat because air flows through the tread blocks to reduce heat. Therefore, bald tyres face negative effects of heat, such as blowouts.

Final words

The government of the UK had decided a minimum tread depth limit of 1.6mm. You must maintain this limit to avoid the risk factors of bald tyres.

You can measure the tread depth with the help of a tread depth gauge or a 20p coin.

If you are busy and cannot visit a garage to change your bald tyres, you can use a Mobile Tyres Fitting Coventry service by calling a tyre fitter at your home or office.