Detect Shower Leaks Early To Reduce Hefty Repairs

By Author: Zac Mealmaker
Total Articles: 68
Comment this article

Needless to say, leaking showers are one of the most annoying problems homeowners complain about. These cause damage drastically if not noticed at the initial stages. The very first and foremost thing you should do for leak detection in Brisbane is to notice the signs and then identify the source of leaks. And at the final stage, you have to fix the leaks. In this article, we are describing the signs as well as symptoms of a leaking shower. Hope this article provides you enough information to seal a leaking shower. So, without skipping any step just read out the rest of the write-up thoroughly till the end.
 
Signs of Shower Leak
Shower leaks can cause structural damage to the building materials. Not only that this causes potential damage for repairing that you have to spend a hefty amount of sum. The very first and foremost common sign is dampness, mould and mildew you will notice in ceilings and walls.
 
A musty odour, reminiscent of that of an old cellar, is frequently a sign of a leak. This earthy ...
... aroma indicates that there is nowhere for the water to dry up. The water just keeps pouring out since it doesn't have the right conditions to evaporate. Remember that this stench is merely a symptom and not the main issue; it is a strong indication that at least one of the following problems is occurring. Water seeps through the shower floor. Determining if the leak originates from your shower floor is nearly impossible. But this is a big red flag if you see watermarks on the ceiling from an upstairs bathroom.
 
To inspect, clean your shower floor, allow it to dry, and then use duct tape to cover the drain. To check if water forms on the ceiling below, fill the shower with water and wait for around fifteen minutes. If so, the problem most likely stems from a shower tray or base that is fractured or poorly sealed.
 
When it comes to leaks in plumbing, drain problems are rather prevalent. After assessing the condition of the shower floor, troubleshoot this portion of the shower. As you carefully inspect for leaks, remove the duct tape and allow the water to drain. Perhaps all that has to be done is replace the drain, which is an easy and affordable procedure. If you're not sure how to take out and replace your shower drain, a qualified leak detection expert in Brisbane can help you better in this case.
 
About the Author: This contribution has been made by Zac Mealmaker who has written a number of articles on Leak Detection Brisbane and provides fruitful information.