Monel 400 Round Bars Exporters In Chennai

By Author: Sidharth Mehta
Total Articles: 13
Comment this article

MONEL Alloy 400 Round Bars is designated as UNS N04400 Round Bars and WNR 2.4360 Bars and WNR 2.4361 Bars. Alloy 400 can be machined at satisfactory rates with machine tools generally employed by industry. It is readily joined by conventional processes and procedures. Most of the conventional welding processes may be used to join MONEL alloy 400 to itself or dissimilar alloys. The choice of welding product is dependent upon the materials being joined and the environment to which they will be exposed.

MONEL alloy 400 is adaptable to virtually all methods of cold fabrication. The forces required and the rate of work hardening is intermediate between those of mild steel and Type 304 stainless steel. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

Monel K500 Sheets & Plates Specificaton
Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Monel 400 Round bars size Diameter: 3-~800mm
Flat bars size Thickness: 2 -100mm
Width: 10 to 500mm
Angle bars size 3mm*20mm*20mm~12mm*100mm*100mm
Channel bars 80 ...
... x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular barss Section 3.0 to 12.0mm thickness
Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow bars 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Monel 400 Round bars Dimensions Diameter / Height:

Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Monel 400 Round bars Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition Hardened & tempered, annealed
Monel 400 Round bars Technique Stainless Steel Cold Drawn, Hot Rolled, Forged Round bars,Cold Rolled, Rod
Processing bars cutting to 650mm
Monel 400 Round bars Form Rod, Round, Channel bars, T-bars, Flat bars, Precision Ground bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round bars, Ingot, Billet, I/H bars, Forging etc.
Chemical Composition
Grade Ni Fe C Mn Si Cu Al S
Monel 400 63.0 min 1.0 – 2.5 0.3 max 2.0 max 0.5 max 28.0 – 34.0 0.50 max 0.02 max
Mechanical PROPERTIES
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 35000 , MPa – 240 40 %

for more information
visit our website:https://divinemetal.co.in/monel-k400-round-bars-manufacture-expoters-suppliers-stockists.html

call us on: +91 9840836360
email us:info@divinemetal.co.in