Astm A516 Gr 65 Carbon Steel Manufacturers In India

By Author: Deep mhatre
Total Articles: 34
Comment this article

ASTM A515 Gr 65 Plates as properties such impact resistance, low-temperature deformation, micro-alloying, welding performance, anti-fatigue performance, anti-crack properties, and high purity, and the material which is used to high-temperature pressure vessels or fabric middle. SA 515 Gr 65 Boiler & Pressure Vessel Steel Plates is under the standard of ASTM A515/SA515, and other two steel grades are there in this standard, i.e. ASTM A515 Grade 60 boiler steel and ASTM A515 Grade 70 boiler steel. As a result, ASTM A515 Gr 65 boiler steel plate has higher tensile strength and yield strength after rolled. A515 Gr.65 HR Boiler Plates are widely used in the fabrication of boilers in industries such as the shipbuilding industry, petrochemical industry, they have excellent mechanical properties and are widely applied.

A515 Grade 65 Carbon Steel Plate has high carbon content which changes its characteristics and it becomes stronger and harder. SA515 GR 65 BQ Plates provide very good performance at the low elevated temperature services, it has good weldability property and good notch toughness. Lower Temperature Carbon Steel ...
... Grade 65 Plate is composed of 0.04 – 0.30 percent carbon. Low carbon steels are typically preferred by auto manufacturers for vehicle body panels. They can be installed when processing which requires low temperatures to avoid negative impact on this type of piping.

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality!
Specification Schedule of ASTM A516 Gr 65 Carbon Steel Sheets & Plates
Specifications ASTM A516 Gr. 65 / ASME A516 Grade 65
Thickness 8-100mm
Length 3000 mm – 8000 mm
Width 1500-3500mm
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish Cold rolled sheet (CR), Hot rolled plate (HR)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Chemical Composition of ASTM A516 Gr 65 Carbon Steel Sheets & Plates
Grade C Mn P S Si
A516 Grade 65 0.24-0.29 0.79 – 1.30 0.035 max 0.035 max 0.13-0.45
Mechanical Composition of ASTM A516 Gr 65 Carbon Steel Sheets & Plates
Grade Yield Tensile Thickness Elongation
A516 Grade 65 MPa -240 min MPa – 450-585 6-100mm 19-23%
Equivalent Material Grade of ASTM A516 Gr 65 Carbon Steel Sheets & Plates
British Standard European Norm ASTM/ASME DIN
BS1501-224-460A/B EN10028 P295GH A/SA516 - Grade 65 DIN 17155 17 MN 4

For More Information:
Visit Our Website: https://www.chhajedalloys.com/index.html
Contact No: +91-932-111-3630
Email I'd: info@chhajedsteel.com