Stainless Steel 317l Sheets & Plates Manufacturers In India

By Author: Deep mhatre
Total Articles: 34
Comment this article

Stainless Steel 317L Sheet is highly corrosion resistant to concentrated acids like hydrochloric and sulfuric acid. They are used where steel is in continuous contact with acids like chlorine and phosphoric acid so Stainless Steel 317L is the suitable alloy as 317/ 317L Steel is the more reliable material against high corrosion and extreme temperature conditions compare to 304 and 304L stainless steel. Steel stock 317 hot rolled steel plate and SS 317L Sheets in maximum sizes and thickness.

A240 Grade 317L material among air pollution control equipment manufacturers, petrochemical processing industries, power generation companies, and pulp and paper mills in India. We are a stocking distributor of renowned manufacturers of Alloy 317L plates. Stainless steel 317L Sheets come in many forms and types like Plates, Foils, Circles, Strips, Coils, Flats, and Shims. The best size of requirement is in our stock if your required size is available in stock.

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product ...
... delivered is of finest quality!
Specification Schedule of Stainless Steel 317L Sheets & Plates
SS ASTM Standard Specification ASTM A240 / ASME SA240
International Standard
ASTM A 480
ASTM A 959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Size Range
Cold rolled ASME SA240 Stainless Steel Sheet 0.5-6.4 mm
Hot rolled ASME SA240 Stainless Steel Sheet 3.0–10.0 mm
Thickness 0.1 to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
Finish 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Form Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate manufacturer and Supplier
Chemical Properties of Stainless Steel 317L Sheets & Plates
Grade C Mn Si P S Cr Mo Ni Fe
317 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.845 min
317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.89 min
Mechanical Properties of Stainless Steel 317L Sheets & Plates
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Standard of Stainless Steel 317L Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS EN
317 1.4449 S31700 SUS 317 -
317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4