Top 10 Benefits Of Bim Clash Detection, Best Practices, Tools, And More Explained In Detail

By Author: BIM Engineering us
Total Articles: 111
Comment this article

One of the most significant advantages of BIM is its clash detection feature.
The absence of clash detection in a construction project can have several negative impacts, including:
1. Increased Rework: Clash detection allows the identification of potential issues between different building systems, such as structural, mechanical, electrical, plumbing, and fire protection. Without clash detection, these issues may only be identified during construction, leading to rework, which is costly and time-consuming

2. Cost Overruns: When clashes are not detected early in the design process, they can lead to significant delays and additional costs during construction. Rework, reordering of materials, and additional labor expenses are just a few examples of the costs that can arise from a lack of clash detection

3. Schedule Delays: Unresolved clashes can cause construction delays, as the construction process may need to be paused until the issues are resolved. In some cases, redesign and additional review of plans may be necessary to address the clashes, which can significantly impact the project timeline

4. Safety ...
... Risks: Clashes can lead to safety risks during the construction process or even after the completion of the project. For example, an unresolved clash between the electrical and mechanical systems can lead to a fire or explosion, causing injury to workers and damage to the building

5. Quality Issues: The absence of clash detection can result in design conflicts that compromise the quality of the finished building. For instance, a poorly coordinated structural design may result in structural instability, leading to cracks or even collapse

The absence of clash detection can result in significant impacts on a construction project, including increased rework, cost overruns, schedule delays, safety risks, and quality issues. Therefore, the use of clash detection software is crucial to identify and resolve potential clashes during the design process and ensure a successful construction project.

In this blog, we will discuss the top 10 advantages of BIM clash detection.

1. Early Detection of Errors: BIM clash detection allows errors to be identified in the design phase before construction begins. This early detection can save time and money by avoiding costly changes and delays during construction.

2. Collaboration: BIM clash detection promotes collaboration among project stakeholders by providing a centralized platform to share information. This enables architects, engineers, and contractors to work together to identify and resolve potential conflicts

3. Efficiency: With BIM clash detection, potential clashes can be identified and resolved quickly, saving time and reducing the risk of rework. This can lead to increased efficiency and improved project timelines

4. Communication: BIM clash detection enables project stakeholders to communicate more effectively by providing visual representations of potential conflicts. This can lead to a better understanding of the project and a more streamlined decision-making process

5. Quality: BIM clash detection can help ensure that the final product meets the highest quality standards. By identifying and resolving conflicts early, the final product is more likely to be error-free

6. Costs: BIM clash detection can help reduce costs by identifying and resolving potential conflicts before construction begins. This can lead to a reduction in rework, change orders, and delays, ultimately saving the project budget

7. Safety: BIM clash detection can help identify potential safety hazards before construction begins. This can lead to improved safety conditions for workers and the public

8. Sustainability: BIM clash detection can help improve sustainability by identifying and resolving conflicts related to energy efficiency, material use, and other sustainability-related factors

9. Decision Making: BIM clash detection provides project stakeholders with the information they need to make informed decisions. By providing visual representations of potential conflicts, stakeholders can make decisions based on accurate information

10. Competitive Advantage: BIM clash detection can provide a competitive advantage by improving project timelines, quality, and efficiency. This can lead to increased client satisfaction and repeat business

Based on a study by Dodge Data and Analytics, 40% of rework in construction is due to design conflicts or clashes.

Building Information Modeling (BIM) has become a game-changer for the construction industry. It enables teams to visualize, simulate, and optimize building design, construction, and operations. Clash detection is an essential feature of BIM that allows designers, engineers, and contractors to identify and resolve conflicts or clashes in the design phase before construction begins.

Different types of clashes
BIM is intended to improve the coordination and collaboration between all parties involved in a construction project. However, despite the advantages of using BIM, there can be clashes or conflicts that arise. Here are some common types of BIM clashes:
1. Structural and architectural clashes: This type of clash occurs when the structural elements and architectural features of a building are not properly coordinated. For example, the design of a beam may interfere with a window or door opening, or a load-bearing wall may conflict with an interior design feature.

2. Mechanical and electrical clashes: This type of clash occurs when the mechanical (HVAC) and electrical systems are not properly coordinated. For example, an HVAC duct may interfere with an electrical conduit or a plumbing pipe may conflict with a ductwork path

3. Plumbing clashes: This type of clash occurs when the plumbing system is not properly coordinated. For example, a plumbing pipe may interfere with a structural element or a plumbing fixture may conflict with a ceiling or wall

4. Fire protection clashes: This type of clash occurs when the fire protection system is not properly coordinated. For example, a fire sprinkler head may interfere with a light fixture or a fire alarm pull station may conflict with a door or window

5. Site clashes: This type of clash occurs when the building design conflicts with the site's constraints. For example, a building may be designed with a large footprint that encroaches on setbacks or zoning requirements, or a proposed building height may exceed local height restrictions
BIM clashes can cause delays, rework, and increased costs in a construction project. However, by using BIM clash detection software, potential clashes can be identified early in the design process, allowing for proactive resolution before construction begins.
BIM Clash Detection Tools

1. Navisworks: Navisworks is a widely used BIM clash detection tool that allows users to combine 3D models from various sources and disciplines, run clash tests, and produce reports. Navisworks offers advanced features such as time-lining, animation, and collaboration tools

2. Revit: Revit is another popular BIM software that enables users to create detailed building models and perform clash detection tests. Revit's built-in clash detection tool allows users to visualize clashes in 3D and provides an easy-to-use interface.

3. Solibri: Solibri is a comprehensive BIM quality assurance software that offers clash detection, model checking, and code compliance verification. Solibri's powerful algorithms can detect clashes and issues that other tools may miss

4. BIM 360: BIM 360 is an online BIM collaboration platform that offers various BIM tools, including clash detection. BIM 360 allows teams to share, view, and analyze 3D models, run clash tests, and track issues and resolutions

5. Tekla Structures: Tekla Structures is a BIM software that offers advanced modeling, detailing, and clash detection capabilities for steel and concrete structures. Tekla Structures allows users to detect and resolve clashes before fabrication, minimizing errors and rework

Breakdown of the BIM clash detection process

1. Model Creation: In the initial stage, the 3D BIM model of the building or infrastructure is created using BIM software. This model includes information about the building's structure, systems, and components, such as walls, floors, roofs, HVAC, electrical, plumbing, and fire protection systems

2. Clash Detection: Once the model is created, the clash detection process begins. The software analyses the model to identify potential interferences between various building components, such as pipes intersecting with walls or ductwork running into beams

3. Clash Reports: After identifying the clashes, the software generates clash reports that provide information about the type and location of the clash. These reports help stakeholders understand the severity of the clash and the potential impact on the project's timeline and budget

4. Collaboration: Once the clashes are identified, stakeholders such as architects, engineers, and contractors collaborate to resolve them. This may involve modifying the design, adjusting the placement of components, or selecting alternative materials

5. Re-Clash Detection: Once the clashes are resolved, the model is re-evaluated using the clash detection process to ensure that all the interferences have been resolved. This step may be repeated several times until all the clashes are eliminated

Best Practices to Resolve Clashes

1. Set up clash detection rules: Before running clash detection tests, it's essential to define the rules and parameters to identify clashes accurately. Setting up rules helps in avoiding false positives and streamlines the resolution process

2. Collaborate and communicate: Clash detection is not a one-person job. It's crucial to involve all stakeholders, including designers, engineers, contractors, and clients, in the resolution process. Collaborating and communicating openly can help in resolving clashes quickly and efficiently

3. Prioritize clashes: Not all clashes are created equal. Prioritizing clashes based on their impact on cost, safety, and schedule can help in resolving critical issues first

4. Use visuals: 3D visualization tools are essential for clash resolution. Visualizing clashes in 3D helps in understanding the issue better and coming up with solutions

5. Document and track: Documenting and tracking clashes and their resolutions is essential to ensure that they don't reoccur. Keeping a record of clashes can also help in identifying trends and improving the clash detection process
BIM clash detection tools and practices are critical to ensure a successful construction project. Using the right tools and following best practices can help in identifying and resolving clashes efficiently, saving time, and cost, and minimizing errors.
Based on a survey by McGraw Hill Construction, 61% of construction professionals using BIM witnessed a reduction in project errors.
What are the viewpoints in clash detection?
In BIM clash detection, viewpoints refer to specific camera views or perspectives of the 3D model that are used to analyze and resolve clashes or conflicts between building elements. Viewpoints are important in clash detection because they allow users to see the model from different angles and identify potential clashes or collisions that may not be visible from other viewpoints.
Viewpoints are created by positioning the camera in the 3D model and setting the viewing angle, elevation, and field of view. Different viewpoints can be created for each clash test to ensure that all possible clashes are detected and resolved.
For example, a clash detection analysis between a structural beam and mechanical ductwork may require several viewpoints to identify all possible clashes, such as a top-down view, a side view, and a 3D perspective view. Each viewpoint provides a different perspective and helps to identify clashes that may be missed from other viewpoints.
Viewpoints can also be used to communicate clash detection results to project stakeholders. By sharing 3D models and viewpoints, stakeholders can better understand the nature and severity of the clashes and provide feedback on the resolution process.
Viewpoints are essential in BIM clash detection as they help to identify and resolve clashes by providing different perspectives and angles of the 3D model. They also facilitate communication and collaboration among project stakeholders by providing a clear and comprehensive view of the clash detection analysis.
According to McGraw Hill Construction, professionals utilizing BIM processes and tools witnessed a 51% reduction in rework.
How does BIM Engineering US, L.L.C. support architects, designers, engineers, and other project stakeholders leverage clash detection tools?
Building Information Modeling (BIM) is transforming the architecture, engineering, and construction (AEC) industry. BIM Engineering US, L.L.C. is a leading provider of BIM services that help architects, designers, engineers, and other project stakeholders leverage clash detection tools to improve the accuracy and efficiency of their projects.
Clash detection is a critical aspect of the BIM process. It involves identifying and resolving clashes or conflicts that arise between different building elements during the design or construction phases of a project. By using clash detection tools, project stakeholders can identify potential clashes before construction begins, saving time and money.
Here are some ways in which BIM Engineering US, L.L.C. supports architects, designers, engineers, and other project stakeholders in leverage clash detection tools:
1. Identifying Clashes: BIM Engineering US, L.L.C. uses specialized software to identify clashes between different building elements. By doing so, they can detect design errors and conflicts early on in the project lifecycle, reducing the likelihood of costly changes during the construction phase

2. Reporting Clashes: Once clashes are identified, BIM Engineering US, L.L.C. generates a detailed report that outlines the clash, the severity of the clash, and the recommended solution. The report is shared with all relevant project stakeholders, ensuring everyone is aware of the issue and can work together to resolve it

3. Resolving Clashes: BIM Engineering US, L.L.C. works closely with architects, designers, engineers, and contractors to resolve clashes quickly and efficiently. They use their extensive knowledge of BIM tools and techniques to develop solutions that meet project requirements while minimizing disruption and delays

4. Updating Models: After clashes are resolved, BIM Engineering US, L.L.C. updates the BIM model to reflect the changes. This ensures the accuracy and efficiency of the 3D model

iFieldSmart Technologies supports clash resolution on a single dashboard – making a coordinated 3D model interference-free.
iFieldSmart Technologies is a leading provider of cloud-based construction management software that offers a range of tools and features to improve project efficiency and collaboration. One of the key features of iFieldSmart's software is its clash detection capabilities, which allow users to identify and resolve clashes between building elements in real time.
In this blog, we will explore how iFieldSmart Technologies identifies clashes within its dashboard and the best practices for resolving these clashes.
What is iFieldSmart Technologies?
iFieldSmart Technologies is a cloud-based construction management software that provides a range of tools and features to help construction professionals streamline their workflows, improve communication, and increase project efficiency. The software includes modules for project management, document management, time and expense tracking, resource scheduling, as well as clash detection.
Clash detection is a critical component of the iFieldSmart platform as it enables users to identify and resolve potential clashes or conflicts between building elements before construction begins. By using iFieldSmart's clash detection feature, construction professionals can save time and money by reducing the need for rework and avoiding construction delays.
How does iFieldSmart Technologies identify clashes?
iFieldSmart Technologies uses a sophisticated clash detection algorithm to identify potential clashes or conflicts between building elements. The algorithm analyzes 3D models of the building design and compares the location, size, and shape of each element to identify potential clashes. The algorithm can detect clashes between various building elements such as pipes, ducts, walls, and beams.
Once the clash detection analysis is complete, iFieldSmart displays the results within its dashboard, highlighting the locations and severity of the clashes. The dashboard provides users with an intuitive interface for reviewing and resolving clashes in real time.
Best Practices for Resolving Clashes
Identifying clashes is just the first step in the clash detection process. To ensure that construction projects run smoothly and efficiently, it is important to resolve clashes as quickly as possible. Here are some best practices for resolving clashes within the iFieldSmart dashboard:
1. Review the Clash Report: The clash report provides a detailed list of all the clashes detected by iFieldSmart's algorithm. Review the report carefully to identify the locations and severity of the clashes. By understanding the scope of the problem, you can prioritize the resolution process

2. Collaborate with Team Members: Resolving clashes requires BIM collaboration between various stakeholders, including architects, engineers, and contractors. Use the iFieldSmart platform to share the clash report with team members and collaborate on a resolution strategy

3. Prioritize Clashes: Not all clashes are created equal. Prioritize the clashes based on their severity and impact on the project timeline. Resolve the most critical clashes first to avoid delays and minimize the risk of rework

4. Use 3D Visualization: iFieldSmart's 3D visualization capabilities allow users to view the clashes from different angles and perspectives, making it easier to identify potential solutions. Use the 3D visualization tool to explore different options for resolving the clashes

5. Document the Resolution Process: Once a clash has been resolved, document the process and the solution that was implemented. This will help to ensure that the same clash does not occur again in the future and can serve as a reference for future projects

Conclusion
BIM clash detection services offer numerous advantages for construction projects. By enabling early detection of errors, improving BIM collaboration and communication, increasing efficiency, enhancing quality, reducing costs, improving safety and sustainability, enhancing decision-making, and providing a competitive advantage, BIM clash detection has become an essential tool for the construction industry.
BIM Engineering US, L.L.C. is a trusted provider of BIM services that help architects, designers, engineers, and other project stakeholders leverage clash detection tools to improve the accuracy and efficiency of their projects. By identifying and resolving clashes early on in the project lifecycle, they help ensure that projects are completed on time, within budget, and to the highest quality standards.
iFieldSmart Technologies' clash detection feature is a powerful tool for identifying and resolving clashes in construction projects. By using a sophisticated algorithm to analyze 3D models, iFieldSmart can detect potential clashes before construction begins, saving time and money and improving project efficiency.
To make the most of iFieldSmart's clash detection feature, it is important to follow best practices for resolving clashes, including reviewing the clash report, collaborating with team members, prioritizing clashes, using 3D visualization, and documenting the resolution process.
Visit Us: www.bimengus.com

BIM Engineering US is a leading Building Information Technology solution service provider offering end to end solutions in Mechanical, Electrical, Plumbing and Fire Protection systems engineering, design and construction.