Advantages Of Using Interior Wet Wall Panels For Bathroom Renovations

By Author: marisnmackle
Total Articles: 534
Comment this article

Interior wet wall panels are becoming increasingly popular for bathroom renovations due to their many advantages over traditional tile and plasterboard installations. In this article, we will explore the advantages of using interior wet wall panels for bathroom renovations in detail.

1. Waterproofing

The primary advantage of using interior wet wall panels for bathroom renovations is their waterproofing capabilities. These panels are specifically designed to be installed in wet areas, and they are made from materials that are completely impervious to water. This means that they will not rot, warp, or swell, and they will not allow water to seep through to the walls behind them.

In contrast, traditional plasterboard installations are vulnerable to water damage. Even if the plasterboard is waterproofed with a membrane or sealant, water can still seep through the joints between the panels and cause damage to the walls behind them. Tiles are also vulnerable to water damage, particularly if they are not installed correctly or if the grout is not sealed properly.

2. Easy to Clean

Interior wet Wall Panels ...
... are also very easy to clean, which is an important consideration in a bathroom. Because they are waterproof, they can be cleaned with water and mild detergent without the risk of damaging the surface. There are no grout lines to scrub, and the panels themselves do not require any special maintenance.

In contrast, tiles can be difficult to clean, particularly if the grout is stained or discolored. The grout lines can also be a breeding ground for mold and mildew, which can be difficult to remove. Plasterboard installations can also be difficult to clean, particularly if they have been painted or wallpapered.

3. Quick and Easy Installation

Interior wet wall panels are also very quick and easy to install, which can save time and money on bathroom renovations. The panels are designed to be fitted together using a tongue and groove system, which means that they can be installed without the need for specialist skills or tools. This can significantly reduce the amount of time and labor required to complete the installation.

In contrast, tiles and plasterboard installations can be time-consuming and labor-intensive. Tiles need to be individually laid and grouted, which can be a slow and fiddly process. Plasterboard installations also require a high level of skill to ensure that the panels are correctly aligned and joined together.

4. Variety of Designs and Colors

Interior wet wall panels come in a wide variety of designs and colors, which means that they can be used to create a range of different looks and styles in a bathroom. They can be made to look like natural stone, marble, or wood, or they can be finished in bright, bold colors or patterns.

In contrast, tiles are limited in their design options, and they can be difficult to match to other fixtures and fittings in a bathroom. Plasterboard installations can also be difficult to customize, particularly if they have already been painted or wallpapered.

5. Durable and Long-Lasting

Interior wet wall panels are also very durable and long-lasting, which makes them a good investment for bathroom renovations. They are made from materials that are resistant to wear and tear, and they will not be damaged by exposure to water or humidity. They are also resistant to scratches and dents, which means that they will look good for many years to come.

In contrast, tiles can be prone to cracking and chipping, particularly if they are not installed correctly or if they are exposed to heavy foot traffic. Plasterboard installations can also be vulnerable to damage, particularly if they are knocked or bumped.

6. Insulation

Interior wet wall panels can also provide insulation for a bathroom, which can help to reduce heating costs and make the bathroom more comfortable to use. The panels have a layer of insulation built into them, which helps to prevent heat from escaping through the walls. This can be particularly beneficial in older properties that may not have modern insulation installed.

In contrast, tiles and plasterboard installations do not provide any insulation benefits, and in fact, can sometimes contribute to heat loss if they are not installed correctly. This can result in higher energy bills and a less comfortable bathroom environment.

7. Resistant to Mold and Mildew

Another advantage of interior wet wall panels is that they are highly resistant to mold and mildew. This is because they are completely waterproof, which means that there is no moisture for mold and mildew to grow on. This is a significant advantage in a bathroom, where moisture levels can be high and mold and mildew growth can be a common problem.

In contrast, tiles and plasterboard installations can be prone to mold and mildew growth, particularly if they are not properly sealed or ventilated. Mold and mildew can be difficult and expensive to remove, and can also be a health hazard.

8. Cost-Effective

Interior wet wall panels are also a cost-effective option for bathroom renovations. While the initial cost of the panels may be higher than that of tiles or plasterboard, the installation process is much quicker and easier, which can save money on labor costs. Additionally, the panels are highly durable and long-lasting, which means that they do not need to be replaced as frequently as tiles or plasterboard.

In contrast, tiles can be expensive to install, particularly if a specialist is required to lay them. Additionally, they can be prone to cracking and chipping, which means that they may need to be replaced more frequently than interior wet wall panels. Plasterboard installations can also be expensive, particularly if they require specialist skills to install.

9. Increased Property Value

Finally, using interior wet wall panels for bathroom renovations can increase the value of a property. This is because they are a modern and desirable feature that can add a touch of luxury to a bathroom. Additionally, because they are highly durable and long-lasting, they can be seen as a good investment by potential buyers.

In contrast, older and outdated bathroom features, such as tiled or plasterboard walls, can be seen as a negative factor by potential buyers and can decrease the value of a property.

Conclusion:

Interior wet wall panels offer a range of advantages for bathroom renovations. They are waterproof, easy to clean, quick and easy to install, come in a variety of designs and colors, are durable and long-lasting, provide insulation, are resistant to mold and mildew, are cost-effective, and can increase the value of a property. If you are considering a bathroom renovation, interior wet wall panels are definitely an option worth considering. If anyone wants to know more about bathroom renovation, Pronto Panels is the best option for you. Also, they offer a wide range of interior wet wall panels for all home and bathroom renovations

My name is Michel Marsin and i work full time as a freelance writer, editor former social worker. I am passionate about writing articles on different topics.