Phase 2 Contamination Report Sydney Is All About Detailed Investigation Of The Site!

By Author: Sydney Environmental Group
Total Articles: 36
Comment this article

Contamination is the term that has made us pretty much concerned these days. Whether its soil or groundwater or air, every where you can find the contamination is occurring at a great pace. However, the soil and ground water contamination like aspects have really managed to draw a great deal of attentions in Australia these days. When it comes to the construction at a site, inspection for a possible contamination is always needed these days. And this leads the way for phase one and phase two contamination report. These reports are prepared on the basis of surveys, inspections and tests done for the soil and groundwater of the sites. So these reports are very vital. Once a site gets clearance on the basis of these reports, then only the construction works can be done. It’s the phase 1 contamination report Sydney that is a very vital paper.
This contamination report carries certain details about a particular site which are very vital. This report tells more about the possibility of contamination for that site. It also describes more about the existing as well as historical activities that are performed on the site. This ...
... report also helps to make the correct assessment about the probable risk of the soil or ground water contamination that can be there. It’s all about Preliminary Risk Assessment or PRA which is done during the phase one contamination assessment. It generates and phase 1 contamination report Sydney which tells about the past uses of that site. While generating this report, the experts also consider the nearby or any adjacent sites so that potential contamination sources can be traced. Soil and ground water contamination can occur due to different reasons.
During the phase one site contamination assessment, they strive hard to know whether or not asbestos is there. Asbestos can be very harmful for humans and other animals. If asbestos is present at that site, then while doing the further construction works, the workers can also come across serious health issues. Once this is traced, they can take steps to eliminate or reduce the asbestos contamination ratio. Some time lead contamination can also occur at a site and this is also not good. Due to the past activities at the site, materials that contain asbestos might be there. And this can lead the way for a contamination. The phase 1 contamination report Sydney also describes this aspect properly.
There can be different types of contamination for a site. When the soil and groundwater like resources get contaminated, that site is not surely the right place for further activities like construction. This is where the phase 2 contamination report Sydney comes in very handy. It carries certain details that help the experts to trace the level or ratio of contamination. During the phase two investigation, they take the samples of soil and ground water and test them. On the basis of these samples, analysis is done to figure out potential contamination. The PRA or Preliminary Risk Assessment that was done during the phase one is then reassessed on the basis of these test reports.
It’s the phase two site investigation or assessment that is also called as the detailed investigation of the site. This is done to characterize the contamination which might be there at the site. The phase 2 contamination report Sydney also suggests more about the potential health risks that human can have due to the contamination. Humans can come across these health issues once they work there at the site. Mostly, the workers at the site are very vulnerable to these health issues. So this must be eliminated or the contamination percentage must be reduced to a safe level before further activities are conducted at that site.