Major Things You Should Do Before Applying Plaster

By Author: Cody Dugdale
Total Articles: 151
Comment this article

If you are planning for plastering, then there are some primary things that you should keep in your mind always. If you are still not aware of these primary as well as basic things then keep reading this from the very beginning till the end. Hope you will be benefitted from this article. On the other hand, if you think to hire plastering companies in Sydney then also it will be a great idea for you.
 
Consider the Surface where You will be Applying Plaster
Before you begin plastering, you should know what type of surface you will be plastering on because the preparation required will vary. Any surface to which you apply plaster has some 'suction.' This professional term directs to how porous the underlying surface is, and controlling this suction is critical to achieving a high-quality finish.
 
Check the Walls
Before you go to apply plaster on the walls, you have to check for cracks, discolouration and loose plaster. In any case, if you find any small holes on the surface then you should fill ...
... them with the filler at the earliest as you can. On the other hand, if you find large holes then either apply a bonding agent or contact plastering companies in Sydney and let the professionals do the needful.
 
Detach All Power Fittings and Faceplates
Before you begin the plastering process, remove or unscrew any light fixtures or power sockets. At the same time, turn off the power to any sockets or light fixtures at the consumer unit. Unscrew light switches and sockets and wrap them in a plastic bag or cling film to keep them clean. This may appear to be a pointless task, but it will actually save you time.
 
Do You Need Prime Plaster before Painting?
It is critical to let the plaster dry completely before painting over it. If you do not, your paint may crack or peel. Prior to painting, seal the plaster with a coat of watered-down emulsion, topcoat, or a plaster primer. If you're using a topcoat or an emulsion, water down the first layer by 10%. You can also discuss the matter with plastering companies in Sydney and let the experts do the needful for your project.



About the Author: This contribution has been made by Cody Dugdale who has written a number of articles on Plastering Contractors Sydney and provides fruitful information. To know more, please visit gyprockers.com.au