Inplant Acoustic Enclosures For Industrial Noise Control

By Author: Kevin Richard
Total Articles: 255
Comment this article

Industrial amenities comprise of a wide range of applications, including construction sites, manufacturing sites, processing plants and so on. The usual sound problem in almost all the industrial applications seem to be the requirement to bring down the usual volume of sound or reduce the level of decibel of specific equipment.

The term machinery may comprise of crushers, punch presses, grinders, printing equipment, drills, pumps, air tools, and jack hammers and so on. The noise made by these machineries may cause fatigue to the operators, might not fulfill the safety necessities of regulating authorities or other noise ordinances of the local bodies.

To reduce the level of sound of the machines, the ideal remedial measure is to put up inplant acoustic enclosures that are soundproof surrounding the equipment that makes the noise. It will not only eradicate the noise but also prevent the sound from infiltrating into the nearby machinery or equipment or the adjoin locations. There are various techniques to accomplish this. But most of these techniques will require some type of defense and heavy material ...
... and maybe some additional amount of a soft absorptive material.

To erect inplant acoustic enclosures that are soundproof, you might like to think about using a blend of the materials as follows:

Sound barriers like industrial sound curtains used as a blend of structures to add weight and assist to improve the STC of the system. One square foot of this material weighs one pound. It is available as rolls and might be cut easily with a domestic knife.

On the other hand, enclosures or fabric wrapped acoustical panels can be fitted with a lining of compound foam. This material comprises of film made of vinyl sandwiched between two sheets of acoustical foam blending a sheet of dense and heavy materials to prevent sound along with a couple of sheets of acoustic foam that is absorptive. The barrier suspends as a flabby mass in between the sheets of the acoustical foam and dissociates it from the present enclosure surface and thereby enhancing its net efficiency.

Moreover, barrier blankets with UV ray protection can be assembled on site all across the machinery to ensure industrial noise control. The blankets made from quilted fiberglass can be made with a barrier septum or without it and is available fitted with grommets, so that they can be hung. You may also have outdoor coverings that are optional, when you need UV ray protection for the material.

Vibrations from a piece of industrial equipment can not only be an annoyance to the staffs, but may also lead to future machine issues or failure. Applying a personalized vibration control treatment is an easy and reasonable venture that can enhance equipment operation while being conducive to a more pleasant, safe working environment and enhanced employee satisfaction.