The Best 5 Plaster Sanders In The Market

By Author: Puzzolana Digital
Total Articles: 1
Comment this article

The Best 5 PLASTER SANDERs in the Market: Reviews and Comparisons
The restrictions in the natural sand mining created shortage of fine sand for plastering works with control on (-)75 microns lead to the development super fine Cone crushers of Floating shaft & bearings design for high reduction capacity in relation to size. They are to give very good product shape.

The Plaster sanders are available in three sizes and can accept a feed up to 25mm and CSS at 3-6mm setting and produce plaster sand (-)2.36mm with control on (-) 150 microns up to a capacity 40to 50 TPH.

The plaster sand is as per IS1542i.e 100% (-)2.36mm.

Differences in Size
Is size is ½ kilogram cement only; 1.3 kg: 3.2ft. (89cm) diameter, and 1.2kg: 3.7ft. (92cm) diameter;

Is size is ½ kilogram cement only; 1.3 kg: 3.2ft. (89cm) diameter, and 1.2kg: 3.7ft. (92cm) diameter; Plaster sand is rated at 3-6mm at 0.02-0.07mm control and 9-15 micron control

The Plaster sand with 80% (00-00,1/2000) reduction with 30-60 micron micron adjustable rise and the adhesive with -75 micron and -75 micron polishing ...
... up to a capacity 40tph

The sand particles are made of glass and have zero lifting power.

Soft rubber SLC delivery system.

The clinkers are made of rubber and lead into the tube from the back side.

Flexible mounting handle allows easy assembly and disassembly.

Types of Plaster Sanders
The dental cement sanding system will be available with the control of up to 25micron and plastic & plasticiser (-)0.5 micron options. We will be developing a system in the future with these two parameters included.

The Plaster Sanders are available in three sizes of 4000, 8000 and 12000 mm with surface area of ~2.5 cubic meter, less than 3 cubic meter each of 4000 mm and 8000 mm.

The Plaster Sanders are available with the three options of chain wheel drive system to 0.4, 0.45 & 0.8 (the highest on the market currently) or the direct drive unit to the belt of 35-40mm wide and about 50-60mm high, which is also the best in the market currently.

Plaster Sanders Price Comparison

Manual, manual drive - US $ 68.97

Pneumatic automatic, belt drive - US $ 79.25

Manual, direct drive - US $ 90.

What is Plaster Sand?
Plaster sand is a material mixture of super-fine plaster powder which is introduced in molten wax.

Plaster sand is also known as super-fine plaster powder and was initially prepared for the purpose of waterproofing.

Different uses of Plaster Sand:-

1. The plaster sand is used for plastering in homes and other building projects.

2. A plaster sand is mixed with plaster of Paris to make earthenware, porcelain tiles and surface coatings, wall covering and ceramics.

3. The plaster sand also known as super-fine plaster powder is used for patterned tinware and hand-made stained glass windows.

4. The plaster sand is used as a base layer in the linocut printing process.

Types of Plaster Sand

5. Plaster sand contains sand particles of almost sizes ranging from 0.5-5 micron in diameter.

6.

Applications of Plaster Sand
Plaster Sand is used for plastering and glazing applications to produce single and multi plane of relief. Apart from this, It is also used for egg boxes, ceramic ware production, decorative products like tiles, ceramic body plates and architectural parts. With perfect finishing, this product can be used for commercial and domestic purpose.

Products available in India

India is one of the biggest producers of plaster sand. The demand for plaster sand in India is very high. The Government of India through ASI has initiated a project on Quality of Sand Manufacturing in India (ASI 2000) with an aim to boost this industry, research and development and also improve the existing quality standards of sand.

How to Select a Plaster Sander
Check the maximum fibre diameter of the tool

Check the colour of the sand

Check the size of the bucket

Check the dimensions of the bucket

Check the type of sand feeder (feed material is for 100% (+)2.36mm sand)

Be sure that the tool is compatible with ISO 1542i, 1542i BV and ISO 1542

Check the top speed

Specification

Max. output 25mm (Plaster sanders)

Max. feed 60mm (Plaster sanders)

300rpm (Plaster sanders)

200rpm (Cone crusher)

Max. capacity 40-50 TPH (Plaster sanders)

Max. Fractional speed 250-400 rpm (Plaster sanders)

Working weight 0.7 kg (Plaster sanders)

1.8kg (Cone crusher)

Specification

Max. output 15mm (Plaster sanders)

Max. feed 400mm (Plaster sanders)

300rpm (Plaster sanders)

200rpm (Cone crusher)

Max. Fractional speed 500-650 rpm (Plaster sanders)

2.

The importance and need for a plaster sander
The type of products such as polyurethane, terpene, and silicone floors and spas is set to grow to $100 billion by 2020, from $70 billion in 2014. However, there is still a lack of professionally trained plasterers to do these jobs properly. This is where the plaster sanders can help.

The Australian Plaster Sander Industry

Australia has a strong plaster sanding industry, with an estimated 1200 plaster sanders and 750 flat roof plaster sanders in use throughout the country, some of which are still based on steam generation or older technology, and many of which require manual pressure to operate.

World market and performance characteristics of a few well known Sintered Plaster Sander brands

1. Hi-Q – Australia based brand of high end plaster sanders with quality options.

The best plaster sanders in the market
Dimensions with method of Feeding:-

Sliding tray: 50x50x50mm

(± 30mm)

Screw-in tray: 30x30x30mm

(± 40mm)

IS1542i.e (Minimalise Leadless type)

Extendable and Common moulding ball design

Excellent sealing

Freely spaced working part is in order.

Can be extended to up to 40 tph.

Enclosing lead

Directional encirclement device is required.

1/4 to 1/2 in. interior head gap

Need cone cradles with integral guide to allow guide bearings and thus provide correct alignment to guide bearings.

Enclosure Should be tested and tweaked by inserting a soft-tip or hard-tip cone under the cone to reduce a potential failure.

No seal rings needed for easy dust ingress.

O.E1 Cordless Plaster Sander

The o.

Questions to ask before buying a plaster sander
What is the thinnest plaster diameter you can produce using this sander ?

What is the main applications of this sander ?

Does the sander use either pre-loaded or pre-charged feeds ?

What is the temperature range in which the plaster sander can work ?

Are the motors mounted above ground or below ground ?

Are the motors electrically heated or submerged ?

How are the motor and foot control circuits configured ?

What type of mounts are used to operate the machine ?

What are the soil specifications that are recommended for use with a plasterer ?

Excerpt from the Technical Data Sheet (TDS)

Requirements

Pty Ltd, Camden NSW

We accept orders only from our authorized distributors.

Conclusion
About

A robust plaster machine made in Germany.

This will work great on plywood & MDF as well.

A powerful and flexible machine.

Resistant to corrosive agents.

Universal for multiple purposes.

Requires about 25 to 30-40cc of resin.

Excellent on tight site.

Verdict

Great value for money. It's a strong machine and stable and clean as the day it arrived.

Chassis is well designed & compact and can be hung from a wall.

Rubber machine-cover helps extend life of the machine in many respects.

It was surprising to see such a well built machine.

Out of the box, it seemed more than adequate for most purposes. It had more than adequate power & control and was fairly powerful and in a good condition.