How To Improve The Quality Of Grass Pellet ?

By Author: Zeno Pellet Machine
Total Articles: 18
Comment this article

In the grass pellet production ,we need to analyze the actual situation .We must select the correct ring die parameters and operating conditions of the grass pellet machine https://www.zenopelletmachine.com/product/grass-pellet-maker-machine/ according to the material's manufacturing characteristics and the specific characteristics of each feed manufacturer, and adjust measures to local conditions. In order to produce high-quality feed. Let's get to know the specific content together.

1.During the production period,the ring die of the grass pellet machine may be broken if the operation is improper . According to experience analysis, the main reasons cause this situation are
1.1The ring die is cracked due to the wear of the matching surface of the transmission wheel.
1.2 The ring die is cracked due to the wear or deformation of the die liner.
1.3 The ring die is impacted by the wear of the transmission key cracking.
1.4 The poor effect of the iron removing device causes metal object indentation on the working surface of the ring die, which causes the ring die to crack.
1.5 The gap between ...
... the ring die and the pressure roller is too small, which causes the ring die to crack.

2.There are many other situations encountered in production and processing. For example, after inspecting the finished product, it was found that the feed pellets were bent and there were many cracks on the outer side. The main reasons for this situation are: 1. The cutter is too far away from the ring die, and it is relatively blunt; 2. The powder is too coarse; 3. The hardness of the feed is too low.

We need to move the cutter appropriately or change the knife according to this situation . In addition, during the straw pelletizing process, increase the fineness of crushing and increase the length of the die hole. If necessary, you can also add molasses or grease. Another situation is the problem of horizontal transverse cracks on the surface of the particles. This is mainly caused by too long fibers, too short tempering time and excessive humidity.
Therefore, we need to reasonably control the fineness of the fiber according to this situation, appropriately extend the conditioning time of feed pellet machine https://www.zenopelletmachine.com/ , control the temperature of the raw materials, and reduce the conditioning moisture. In this way, the problem of lateral cracks can also be reduced, so that the level of straw particles is improved.

Zeno Pellet Machine https://www.zenopelletmachine.com/ are specialized in producing Pellet machine, floating fish feed machine,fish feed production line, pet food machine ,animal feed machine and related equipment.We have years’ of experience of feed machines developing and designing. As an expert in fish feed machines, we are always taking manufacturing and supplying high-quality fish feed production equipment with rational prices as the major goal, and the machines from our company are working well for making qualified pellet fish feed to ensure the profits of fish farmers.