ALL >> Home-and-Garden >> View Article
How To Raise House Plants From Seeds Easily
The principal house plants which are easy to raise by sowing seeds are Aloe (succulent plant), Asparagus species, Begonia semper-florensundB. rex, cacti (many kinds), Clivia, Cyclamen, Eucalyptus, Fuchsia (varieties), Grevillea robusta, Opuntia, Passijiora, Phoenix (palm), Primula malacoides and P. obconica, Ricinus, Rochea (succulent plant), Saintpaulia (hybrids) and Solatium capsicastrum.
The most suitable compost
It is best to sterilise the compost, and it should therefore be heated in a sterilising apparatus for 10 minutes at a temperature of 18o° F. After this partial sterilisation, the compost must be spread out on a bench to cool before use.
Watering a seed pan by partial immersion
A simple method of sterilising the compost is to water it with Cheshunt Compound steriliser. This chemical can be obtained from any seed store. It consists of a powder which, when dissolved in water, is sprinkled over the compost before or after the seeds have been sown. It is perfectly safe to use, and does not injure the smallest seedlings. Seed boxes and pots can be sterilised by this ...
... method and thereby made pest free. A satisfactory seed compost may be obtained by sterilising the loam only, and then adding the peat, sand and fertiliser.
Preparing the seed compost
The soil ingredients are sifted through a sieve having a |-mch mesh and thoroughly mixed. The pots or seed pans are given plenty of drainage crocks which are covered with rough siftings from the compost, and the receptacles are then filled with the compost.
This is made moderately firm by pressing it with the fingers; it is then moistened by holding the receptacle in a pail of water.The water must not come above the rim of the pot because it is necessary that the moisture should rise up through the compost. As soon as the surface of the soil becomes damp, the pot is set aside to drain for a few hours before seed sowing is commenced.
The depth to which the seeds are covered depends on their size. Very fine seeds, such as those of Begonia, require only a fine sprinkling of silver sand, whereas larger seeds should be covered to the depth of their greatest dimensions. When the seeds have been sown, the receptacles should be covered with panes of glass and shaded with sheets of paper.
Each day the glass should be reversed to prevent the condensed moisture from dripping on to the soil, and setting up decay. As soon as the seedlings appear, however, the paper covering must he removed and ventilation of the receptacle begun. The glass covering should therefore be tilted slightly. This is conveniently done by means of the plant label, and the amount of air is increased in this way until the covering can be removed altogether.
Pricking out the seedlings
As soon as the seedlings have developed their first true leaves they are pricked out ½ inch apart in pots of fertile compost such as John Innes Potting Mixture No. 1, and immediately watered in. They are shaded from bright sunlight until they are established. This generally takes 7-14 days, after which they are given more light and air. The 'cuttings' are taken in the usual way, by severing them just below a node (where a leaf is inserted in the stem). They are then fixed in the mouths of small-necked bottles where they remain suspended. The bottles are filled to within a fraction of an inch of the top of the necks with water, preferably rain water.
To prevent green scum (algae) forming in the water, it is best to place a few small lumps of charcoal in it. If this operation is done in the spring, the bottles of 'cuttings' can be set on the window-sill, and roots will form in a few weeks. Potting must be done immediately roots begin to form.
Visit: http://www.realniches.com or http://www.realniches.com/archives/category/gardening/ for some useful tips on home indoor gardening.
** Attention Webmasters / Website Owners **
You can reprint this article on your website as long as you do not modify any of the content, and include our resource box as listed above with all links intact and hyperlinked properly.
Add Comment
Home and Garden Articles
1. A Complete Guide On Building Repair ServicesAuthor: Christian Zox
2. Indoor Vs. Outdoor Mold Spore Comparisons: What Mold Inspectors Evaluate
Author: BayAreaMoldPros
3. Why Waterproofing Is Necessary- An Overview
Author: Christian Zox
4. What Credentials Should A Professional Mold Inspector Have? Certified Mold Inspector Vs. Licensed Contractor
Author: BayAreaMoldPros
5. Thermal Imaging For Mold Inspection: What Infrared Cameras Can—and Cannot—detect
Author: BayAreaMoldPros
6. Mold Testing Limitations: What A Laboratory Report Cannot Tell You
Author: BayAreaMoldPros
7. Crawlspace Mold Inspection: Moisture, Ventilation And Structural Risk Factors
Author: BayAreaMoldPros
8. What Your Peeling Paint Is Trying To Tell You?
Author: Jake Deering
9. Attic Mold Inspection: Condensation, Roof Leaks And Poor Ventilation
Author: BayAreaMoldPros
10. Bathroom Mold Inspection: Distinguishing Surface Mold From A Moisture Problem
Author: BayAreaMoldPros
11. Mold Growth Behind Cabinets, Baseboards And Wall Cavities: What Inspectors Look For
Author: BayAreaMoldPros
12. Why Is Choosing Strata Painters A Good Idea?
Author: Jake Deering
13. Advanced Mold Testing Explained: Ermi, Mycotoxins, Dna & Traditional Testing
Author: BayAreaMoldPros
14. Hepa Vs. Standard Air Filters For Mold: How Hepa Air Purifiers Capture Mold Spores
Author: BayAreaMoldPros
15. How To Read A Mold Test Report: Understanding Mold Species, Spore Counts & Aspergillus/penicillium
Author: BayAreaMoldPros






