Expert Tips On How To Meet The Manhole And Drain Testing Standards Set By Irish Water

By Author: Danniel Kollen
Total Articles: 24
Comment this article

It’s not common for builders and developers to complain about the standards set by Irish Water in Manhole and Drain Testing. The water and wastewater services provider has always been stringent while plotting down the requirements for the test. Builders and developers have to meet them today and inability to do so, almost always end up in compliance issues. Many try to avoid them as the consequence can be too costly to bear. If you are here, you must be equally worried about the Self Lay Agreements laid under a manhole and drain testing. So, we have deviated a bit from drain repair in Dublin and the issues it accompanies to share a few tips and tricks on how to avoid the difficulties arising out of the new manhole and drain testing requirements.

Tip #1: Get your Drain Testing Correct in the First Attempt

Many of you might have tried to carry out the test yourself and ended up with a futile attempt. The reason can be anything between lack of equipment to unfamiliarity with the process to miscellaneous other issues. Others avoid taking the hassle. There are still others who try to evade the cost and delays ...
... from a false failure. Frankly speaking, there’s no point in postponing the drain testing because it might cause the cost involved in drain repair in Dublin to escalate later.

The expert tip is to hire a professional, who has years of experience in the industrial work and equipped with tools to pull off the job in the very first attempt. Even if a glitch appears, the expert shall have the equipment and due diligence acquired over the years to locate the point of failure. The trenchless technology and CCTV camera leveraged by them are reasons enough to convince you of their capabilities. Plus, there’s a certain assurance given by professionals that the drain testing shall meet the standards set by Irish Water. The only thing that you have to ensure is that the air pressure test carried out by the contractor you are hiring is compliant with Irish Water’s freshly rolled out requirements.

Tip #2: Take Note of the Different Steps Involved in Manhole and Drain Testing

Just in case you are unaware, one must comply by the IS En 1610 standard while hydrostatically testing manholes. And not just that, sometimes Irish Water engineers wish to witness the tests. The duration is often 30-minutes after the time taken for filling and absorption. The whole process is time-consuming so, a wrong step can mean a lengthy repetition of the entire procedure again. A professional here, working with the right equipment, guarantees perfection in the first attempt.

Moreover, the involvement of computerised drain testing system means you will get to document everything, starting from the stabilisation period, allowable losses, filling time, actual losses and every other detail. With such detailing in pressure graph, you can be sure of Irish Water’s approval to drain and manhole test results.

Tip #3: Evade Test Non-Compliance in Sump Pump Commissioning

The Civil Engineering Specification of the 7th Edition mentions builders and developers to conduct a leak tightness test or Hydrostatic test on the tank to successfully install a sump pump. However, simply running the test is not enough. One has to certify that it’s acceptable by the Irish Water. Also, bear in mind that the process takes 7-days to complete. A wrong step will not just delay the system commissioning but also inhibit the project from flowing seamlessly. Involving a professional here can save you from the hassles. They typically use computerised testing systems and generate a transparent graph for easy inspection by Irish Water engineers.

Now that you have tips at your fingertips, use them smartly to enjoy approval from Irish Water. Though you may find many professionals, adept in methods in drain repair, lateral inspection, mainline surveys and drain survey in Cork, USA Ltd is often the go-to provider for builders, developers and households. Mere words to describe them will fall short. Hire them once to test out their professionalism and quality of work.

Author Bio:
The author has been writing on drain repair, pipeline renovation, water main cleaning and drain survey in Cork for a while. What keeps her interested in such civil engineering works are technology advancements and her love for the community.