Water Jet Ejectors

By Author: crystaltcs
Total Articles: 73
Comment this article

Crystal TCS Pvt. Ltd. it’s one of the leading water jet ejectors and manufacturing companies in India. This ejector uses water instead of steam.
Range of a water jet ejector is depends on water temperature and this water jet ejector is commonly used in lifting, mixing, pumping, movement of liquids and granular solids and slurry handling etc. The water jet ejector converts water into kinetic energy.
The water jet ejector uses water as the driving force or the induced fluid is penetrated and the condensates are condensed and the non-condensed gases are then compressed or the maximum absolute pressure obtained by these types of injectors depends on the water temperature or the inductive fluid or generally, the vapor pressure of the operating liquid is almost equal to the absolute pressure operating temperature at the close or these units are the most economical where condensable vapors must be handled.
Ejectors or Educators are optional for mechanical vacuum pumps for the following reasons:
1) No source of energy is required except the intended gas.
2) They are reliable vacuum producers as they do ...
... not have moving parts.
3) The ejector is easy to install and maintenance is also minimal.
4) The ejectors do their own priming and activate by simply turning on the flow of driving water.
Water jet ejectors have three basic components:
1) Converted nozzle
2) A forgettable
3) The body to hold these parts
A water jet ejector, the intended power is taken all the way from the kinetic energy of the flowing water or this is one of the most logical, easy to install and logical concepts to deal with lion steam. It boots a simple design that doesn't really require any special maintenance.
In this system, the intended power is taken by the kinetic energy of the moving water or considered as a cost effective system for handling condensable vapor, the ejector has the simple design and no moving parts and customers appreciate this water jet ejector system for minimal maintenance, self priming and durable construction.
In this system, the desired power is taken by the kinetic energy of the rotating water and the considered a cost effective system for handling condensable vapor, the ejector system has a simple design and no moving parts. Compact steam must be handled first.