Finding Flexible Solar Piping And Fittings For Solar Installations

By Author: Latitude51 Solar
Total Articles: 26
Comment this article

Whether you’re looking to invest in solar pool heating or a solar powered water heater, solar piping and fittings are important parts for smooth operation of solar installations. They are specifically designed for the quick and hassle-free installation of solar hot water systems. Therefore, finding the flexible solar piping and fittings is necessary for the operation of solar powered heating kits.

Content –

Are you thinking to install solar water heating systems quickly? If so, then you should definitely consider flexible piping and fittings. The solar piping helps you speed up the solar system installation process. They are considered as an affordable to run pipes to and from the roof to the mechanical room.

Generally, the stainless steel piping is insulated beforehand with high temperature insulation. The pipes are covered with a tough UV resistant coating. This coating will protect the pipe from degradation during sunlight and birds pecking at it.

Remember that, stainless steel made solar piping is much more economical alternative ...
... than copper pipe. The solar pipes are available in different measurements, like 5/8" for the installation in residential premises and 1" for installing in commercial properties.

With industry-standard solar piping, you will reduce the time of installation to half. Apart from this, choosing good quality piping minimizes the chances of leaks. Keep in mind that, it can take hours to fix leaks if the system contains liquid that requires to be draining.

When you’re done with the installation of vacuum tube solar collectors on the roof, you need to find the right spot for the installation of solar tank for water storage and pumping station. Besides, you have to purchase a reliable and easy to install piping system for your solar systems. In fact, both installers and homeowners should prioritize it.

Likewise every homeowner, you want a cost-effective and smoothly operating piping system ensuring much longer durability. On the other hand, a solar installer invests in solar piping that takes the least time for the installation, doesn’t generate maintenance call later on and allows the installer to get the job done quickly. As a result, they will move on to their next job available faster.

There is a huge availability of solar powered piping systems available on the market. Choosing the right piping system will allow you take advantage of all of its benefits while working with solar water heating peak operating conditions. The most common piping systems available almost for everyone in Canada include copper pipes and fittings, flexible stainless steel pipes and fittings, etc.

How do you evaluate the right solar piping?

If you want to make the right purchase of solar piping and fittings, you need to consider followings:

Consider the pressure and temperature rating.
Focus on the familiarity and ease of fabrication.
Consider its availability.
Consider the anticipated useful lifetime of the installation.
Consider the adaptability for outdoor usage.
Understanding the solar peak operating conditions in Canada –

Most populated Canadian cities are located in the southern region of the country. The places with less more flexible peak operating conditions than Central and Southern US States include Florida, Arizona and even California.

The maximum operational pressure depends on the length of closed loop, friction loss, flow and height between Highest Point – solar collectors on the roof and the lowest point – solar water tank installed at the basement floor ground.

Moreover, the maximum operational temperature can be attained during summer. Summer is the time when energy is generated by the solar panels. The energy output exceeds hot water requirements causing heat buildup and increasing temperature as well as pressure in the closed loop piping system.

You will find solar insulation at its peak in some places whereas the hot water consumption is very low. However, the temperature in a closed loop solar system can reach as high as 250°F. The maximum operating pressure must be within 80 PSI for most residential applications.

Author Information –

This article is written by Latitude51 Solar, specializes in providing pre-engineered solar water heating packages including necessary solar fixtures like solar piping and fixtures for smooth and hassle-free solar installations as well as maximum efficiency and durability.