Vapour Recovery Systems Manufacturers And Suppliers

By Author: Crystal TCS
Total Articles: 73
Comment this article

Vapour Recovery Systems is the process of recovering the vapour of gasoline or other fuels so that they do not escape into the atmosphere. This is often done (or required by law) at filling stations, in order to reduce noxious and potentially explosive an amount of gas and pollution.

Vapour recovery units are also becoming commonly used in the oil and gas industry as a means of recovering natural gas Vapour and making it a usable and profitable product. Specifically, a newer form of Vapour recovery technology, Ejector Vapour Recovery Systems Units create a closed-loop system which not only recovers valuable vapour but also reduces methane and Volatile organic compound (VOC) emissions. Generated Vapours in most applications come under the category of Volatile Organic Compounds (VOC). Some of these compounds are known to affect air quality and create Air pollution and are classified as Hazardous Air Pollutants (HAP).

Vapour Recovery Systems are also used in the oil and gas industry to provide flash gas recovery at near atmospheric pressure without the potential of oxygen ingress from the top of the storage tanks.

Vapour ...
... Recovery Unit (VRU)

A Vapour Recovery Unit (VRU) is a set-up designed to remove unwanted vapours present in crude oil or distillate tanks allowing operators to comply with prevailing emission regulations. VRU systems can be employed in a wide range of chemical industries with several variants available. For example, a Vapour Recovery System for storage tanks can be used to recover vent gas from crude oil and distillate tanks at storage facilities.

Ejectors in Vapour Recovery Systems:

• Ejector vapour recovery systems operate in the form of a closed-loop system.
• They suck the vapours and discharge them into the Intermediate stages of the Gas compressors. The Gas compressors further compress the vapour mixture and discharge to the gas supply lines.
• The high-pressure gas stream from the Gas Compressor is used as an energy source by the Ejectors in Vapour Recovery Systems.
• As the high-pressure gas passes through the ejector it expands and forms a low-pressure region which sucks the vapours.
• The vapours mix with the motive gas and mixture is then compressed up to discharge pressure.
• A recycle line is used between Ejector Discharge and Suction points to control the suction pressure.

In the Oil and Gas Industry, product vapours are produced by the following processes:

• Flashing from High Pressures to Low Pressures
• Gas-Liquid Separation in Separators
• Evaporation from Storage tanks

Crystal TCS Pvt. Ltd is one of the Top Indian Manufacturers & Suppliers of Vapour Recovery Systems. Ejector Vapour Recovery is relatively new to this field but is rapidly gaining acceptance over conventional recovery systems.

We at Crystal TCS Pvt. Ltd has performed intensive research and development for coming up with Ejector Solutions for Vapour Recovery Units.

Contact us: 02532501600

E-mail: info@crystaltcs.com

Visit us: https://www.crystaltcs.com/ejector-vapour-recovery-unit.php