Gas Boiler Installation Advice And Understanding

By Author: Carolyn Clayton
Total Articles: 497
Comment this article

During times of economic uncertainty it is essential to understand various ways in which you can bring savings to your household. Apart from the obvious such as switching off lights and ensuring there is no draughts from windows and doors you should also consider the way in which you generate hot water. By removing your old inefficient electric model and opting for a gas boiler installation you could potentially bring about a reduction in the cost of your annual utility bills by hundreds of dollars.

Any type of boiler installation can involve a serious amount of work and understanding. You need to understand that if you are going to carry out the task yourself you will need to devote a fair degree of time to ensure the results are successful.

Before you can install any form of gas boiler you must ensure that you are correctly certified to do the work. Usually a state would require permits to be acquired before replacing or installing a new boiler. It does not take long to check with your local council about specific building codes governing the installation of gas appliances.

Once you are sure that you have ...
... the correct licenses to carry out the work then the next step would be to prepare the actual location. You will need a number of different connections, for example there should be a gas line, water line, as well as an electrical circuit in close proximity to where the boiler is to be placed. The further away the connections the greater the overall budget will be and the more complicated the task.

It should not need to be stated that a gas boiler should be installed away from any combustible solids or liquids as well as any material that may get damaged from heat or low humidity.

When you take delivery of a new gas boiler you should ensure that all the parts are present. This includes circulator pumps, boiler dressings, zone valves, and other accessories. Once you are sure all the components have been sent then you will need to dress up the boiler. This basically means adding together all the accessories to the boiler.

To install the feed and return water piping will require a through understanding of the instruction manual that comes with the boiler. Make sure this is read and understood in full before commencing with the project. Always ensure that all parts fit together correctly.

The type of gas you are going to use will have a bearing on how the gas lines are hooked up to the boiler. For propane you can connect the device to the regulator and the gas valve by understanding the local plumbing codes. For natural gas units a black threaded pipe is generally used to connect to the existing mains line.

Only once you are sure that the installation has been carried out exactly to the letter should you turn on the gas and water supplies. When first starting the boiler keep a close watch for on any unwanted fumes such as carbon monoxide.
Northern Gas Heating - the UK's local supplier of new Central Heating Systems offer New Boilers and Boiler Installation.