The Advantages, Design, And Performance Of Wayne-dalton Rolling Steel Fire Doors In Connecticut Indu

By Author: Lavallee Overhead Door
Total Articles: 2
Comment this article

You have already set your mind that rolling up a door is the safest and convenient way for your storage and other facilities. It is commonly used in warehouses, airplane, and storefronts to secure the establishment and the products inside it. These doors roll up into a coil to avoid interfering with other building composition and it also saves space.

Lavallee Overhead Door has available all industrial doors to be installed in a house garage, schools, business establishments, shopping malls, military bases, hotels, hospitals and parking lots (specifically basement parking). Rolling steel fire doors are at very low maintenance when operated and used properly. Here at Lavallee Overhead Door, rolling steel fire doors have lots of advantages for your business.

Rolling steel fire doors are the best choice for any facility that has anything to do with security and durability. Learn more about the advantages of rolling steel fire doors for your facility.

The first advantage of the rolling steel fire doors is durability. Rolling steel doors are the long suit in one’s company or establishment that needs maximum ...
... permanence in terms of attributes. The structural angle guides and bottom bars of a rolling steel door can handle damage and can be easily fixed. It can also withstand heavy wind loads.

Security is one of the advantages of rolling steel fire doors, the most secure possibility to a facility. Interlocked curtain slats are impassable to the human hands.

Space restrictions. Rolling steel fire doors are an absolute choice If you have limited space. Less space is needed for the the operation and installation.

Effortless operation. This is one of the advantages of the rolling steel fire doors wherein it can alleviate oil for torsion springs. It is also very efficient.

The rolling steel fire door is also flexible or adaptable. It can be customized for different uses and very amenable as well. You can customize the finish, the colors and the procedure of operation.

Velvety design. The lacquer design of the rolling steel fire door needs no paint as it is polished. The door is decorated with a bolted barrel design that looks presentable and gives easy access for fixing.

Rolling Steel Fire Door Design and Performance

When it comes to designs, the Wayne-Dalton has a lot to offer. One design of the rolling steel fire door of Wayne-Dalton is the Firestar700 series. This is the industry’s most innovative fire door. It can be drop-tested and can be reset anytime by anyone. It has a feature that outperforms industry standard fire doors in all areas. It includes easy testing skills: burnished, muffled, authentic and long-lasting.

Firestar 700 Series rolling doors are simple and a revolutionary solution to your fire protection needs and safety. It has features that include: easy to test and floor resettable, preassembled drop-out mechanism, chain hoist, motor, lift up or crank operation, operations are available for right hand or left hand, UL/FM approved, Smoketite UL labeled smoke control and draft package, component designs for all door sizes are systematize, viscous governor technology, approved and tested revolutionary planetary gear design for a minimum of 20,000 cycles.

Firestar 700 Series’ performances are also of high standard. It has unique counterbalance technology in case of fire. They can easily drop test and reset the fire door without resetting the spring tension and averting the cables. When we talk in about safety, the drop-out mechanism of the Firestar 700 Series was created to remove downtime during drop testing while the viscous governor technology results in smoother and noiseless operation.

800 Series Rolling Doors are one of the many products Lavallee Overhead Door offers. It is designed to meet the durable requirements of any industrial or commercial approach. It provides adaptability in materials with selections of prime steel, aluminum or stainless steels. There are also different color ranges that you can choose on. These doors have a pre-painted curtain of minimum 22-gauge steel. Not only that it features a strong double-angle bottom bar that strengthens the lower edge of the curtain against wind pressures. Mounted on the outside of the bracket is the spring tension adjusting wheel at the end of the tension rod. Inside the adjusting wheel is the is the tight-side room application where there are only limited sizes. The hood conceals the curtain coil and counterbalance mechanism. While slat doors have available colors such as blue, brown, beige, and white doors.

It can perform a wind load of up to 55 PSF and does not require fasteners that poke into the guide openings.

One of the most in-demand rolling steel fire doors is the Firestar 700C Series. It sizes up to 24’ wide and 24’ higher equivalent to 324 square feet, easily tested, non-tension release, floor resettable, follows to NFPA Standard 80 and, R-Value=5.0 and rated with UL/FM.

Firestar 700C Series is a fire-resistant shield, making it the best choice for external vents that needs fire doors. It is the most revolutionized fire door in the industry. It also shows progressive designs that exceed other fire doors with dependable, long-lasting, noiseless door operation. It can be easily dropped and tested within seconds, without tools or technician needed. Rest assured that it can function safely in case of fire emergencies.

Wayne-Dalton has a new model called Model 926-Medium Duty Rolling Steel Service Door. It gives a low-cost yet durable solution for your rolling door needs.

Features and Benefits of the Model 926-Medium Duty Rolling Steel Service Door

• 26 Gauge #17 slats are 2’’ flat style profile, made from hot-dipped polished steel with polyester primer and broiled on the white polyester top coat paint finish.
• Standardized for 20 PSF wind load
• Windsocks are used for wind load performance and to avoid lateral slat movement
• 1/8’’ thick steel channel guides (‘G’ guides) and 3/16’’ thick steel wall angles are contained in the guide assembly
• The counterbalance barrel assembly is made from 4’’ steel pipe and helical and helical torsion springs are designed for 20,000 cycles which includes iron spring fittings.
• The bottom bar assembly is constructed from polished steel, double angle design with bottom astragal
• It can size up to 12’ wide and 12’ tall.

Consult Lavallee Overhead Door for all your available options for this rolling steel door. They include side bolt locks, omit hood, vinyl weather seal for curtain, lintel brush, and rubber hood baffle, powder coat hood, guides and bottom bar (to match the curtain), manual chain hoist, motor operator and bottom bar sensing edges.

Contact us

If you’re willing to make your establishment secure and safe or if you want us to fix your broken stuff, we are here locally to serve you. You may give us a service request by calling us through our hotline 860-528-1036 or message us at https://www.lavalleedoor.com/contact/. We work around the clock to maintain your loading dock equipment safe, secure and efficient.